This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

A1126LLHLT-T +BOM

Hall Effect Sensor with a minimum sensitivity of 0.5mT and a maximum of 5.5mT, suitable for detecting magnetic fields

Manufacturer:

Allegro MicroSystems
Mfr.Part #:

A1126LLHLT-T
Datasheet:

A1126LLHLT-T Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
Body Breadth:

1.91 mm
EDA/CAD Models:

Request Free CAD Models for A1126LLHLT-T

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

A1126LLHLT-T General Description

The A1126LLHLT-T is a cutting-edge linear Hall-effect sensor that boasts high sensitivity and precise measurement capabilities. Operating on a supply voltage range of 2.5V to 3.3V, this sensor delivers a quiescent output voltage that is approximately half of the supply voltage, ensuring accurate readings. With its linear output voltage proportional to magnetic field strength, this sensor offers an impressive sensitivity of 0.8mV/G and a low temperature coefficient of 10ppm/°C. Its wide operating temperature range of -40°C to 85°C further enhances its versatility, making it suitable for use in a variety of environmental conditions

Key Features

AEC-Q100 automotive qualified

Omnipolar operation

Low switchpoint drift

Superior temperature stability

Insensitive to physical stress

Reverse-battery protection

Robust EMC capability

Robust ESD protection

Specifications

Pbfree Code	Yes	Part Life Cycle Code	Active
Reach Compliance Code	compliant	Body Breadth	1.91 mm
Body Height	1 mm	Body Length or Diameter	2.98 mm
Hysteresis	3 mT	Input Mode	UNIPOLAR
JESD-609 Code	e3	Magnetic Field Range-Max	5.5 mT
Magnetic Field Range-Min	0.5 mT	Mounting Feature	SURFACE MOUNT
Number of Terminals	3	Operating Current-Max	4 mA
Operating Temperature-Max	150 °C	Operating Temperature-Min	-40 °C
Output	OPEN-DRAIN	Output Current-Max	60 mA
Output Polarity	INVERTING	Output Range	30-60mA
Output Type	DIGITAL CURRENT	Sensors/Transducers Type	MAGNETIC FIELD SENSOR,HALL EFFECT
Supply Voltage-Max	24 V	Supply Voltage-Min	3 V
Surface Mount	YES	Technology	BICMOS
Terminal Finish	MATTE TIN	Termination Type	SOLDER