This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ACPL-332J-500E +BOM

High-reliability logic-out push-pull design ensures consistent performanc

2.5A Gate Driver Optical Coupling 5000Vrms 1 Channel 16-SO

Under Voltage Lock-Out Protection (UVLO) with Hysteresis
Desaturation Detection
Miller Clamping
Open Collector Isolated fault feedback
“Soft” IGBT Turn-off
Fault Reset by next LED turn-on (low to high) after fault mute period
Available in SO-16 package
Safety approvals: UL approved, 3750 VRMS for 1 minute, CSA approved, IEC/EN/DIN-EN 60747-5-2 approved VIORM = 891 VPEAK
Specifications
2.5 A maximum peak output current
2.0 A minimum peak output current
250 ns maximum propagation delay over temperature range
100 ns maximum pulse width distortion (PWD)
15 kV/µs minimum common mode rejection (CMR) at VCM = 1500 V
ICC(max) <5 mA maximum supply current
Wide VCC operating range: 15 V to 30 V over temperature range
1.7 A Miller Clamp. Clamp pin short to VEE if not used
Wide operating temperature range: –40°C to 105°C

Product Category	Logic Output Optocouplers	Mounting Style	SMD/SMT
Number of Channels	2 Channel	Isolation Voltage	3750 Vrms
Maximum Continuous Output Current	2.5 A	If - Forward Current	25 mA
Vf - Forward Voltage	1.95 V	Vr - Reverse Voltage	5 V
Pd - Power Dissipation	600 mW	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 105 C	Series	ACPL-3
Fall Time	50 ns	Height	3.51 mm
Length	10.31 mm	Product Type	Logic Output Optocouplers
Rise Time	50 ns	Factory Pack Quantity	850
Subcategory	Optocouplers	Width	7.49 mm
Unit Weight	0.021164 oz