This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ACS716KLATR-25CB-NL-T +BOM

3V 16-Pin SOIC W T/R ACS716KLATR-25CB-NL-T

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

Current Sensor 25A 1 Channel Hall Effect, Open Loop Bidirectional 16-SOIC (0.295", 7.50mm Width)

▪ Industry-leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques
▪ Small footprint package suitable for space-constrained applications
▪ 1 mΩ primary conductor resistance for low power loss
▪ High isolation voltage, suitable for line-powered applications
▪ User-adjustable Overcurrent Fault level
▪ Overcurrent Fault signal typically responds to an overcurrent condition in <2 μs
▪ Integrated shield virtually eliminates capacitive coupling from current conductor to die due to high dV/dt voltage transients
▪ Filter pin capacitor improves resolution in low bandwidth applications
▪ 3 to 3.6 V, single supply operation
▪ Factory trimmed sensitivity and quiescent output voltage
▪ Chopper stabilization results in extremely stable quiescent output voltage
▪ Ratiometric output from supply voltage

Pbfree Code	Yes	Part Life Cycle Code	Active
Reach Compliance Code	compliant	Additional Feature	IT HAS A SENSITIVITY OF 18.6 MV/A
Body Breadth	7.5 mm	Body Height	2.65 mm
Body Length or Diameter	10.3 mm	JESD-609 Code	e3
Linearity (%)	0.75 %	Mounting Feature	SURFACE MOUNT
Number of Terminals	16	Operating Current-Max	11 mA
Operating Temperature-Max	125 °C	Operating Temperature-Min	-40 °C
Output Type	ANALOG VOLTAGE	Sensors/Transducers Type	MAGNETIC FIELD SENSOR,HALL EFFECT
Supply Voltage-Max	3.6 V	Supply Voltage-Min	3 V
Surface Mount	YES	Technology	BICMOS
Terminal Finish	MATTE TIN	Termination Type	SOLDER