This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ADL5354ACPZ-R7 +BOM

RF Mixer 2.5 GHz SINGLE MIXER

Manufacturer:

Analog Devices, Inc
Mfr.Part #:

ADL5354ACPZ-R7
Datasheet:

ADL5354ACPZ-R7 Datasheet (PDF)
RF Type:

Cellular
Frequency:

2.2GHz ~ 2.7GHz
Number Of Mixers:

2
Gain:

14dB
EDA/CAD Models:

Request Free CAD Models for ADL5354ACPZ-R7

ADL5354ACPZ-R7 General Description

The ADL5354 uses a highly linear, doubly balanced, passive mixer core along with integrated RF and local oscillator (LO) balancing circuitry to allow single-ended operation. The ADL5354 incorporates the RF baluns, allowing for optimal performance over a 2200 MHz to 2700 MHz RF input frequency range. The balanced passive mixer arrangement provides good LO-to-RF leakage, typically better than −37 dBm, and excellent intermodulation performance. The balanced mixer core also provides extremely high input linearity, allowing the device to be used in demanding cellular applications where in-band blocking signals may otherwise result in the degradation of dynamic performance. A high linearity IF buffer amplifier follows the passive mixer core to yield a typical power conversion gain of 8 dB and can be used with a wide range of output impedances.

The ADL5354 provides two switched LO paths that can be used in time division duplex (TDD) applications where it is desirable to ping-pong between two local oscillators. LO current can be externally set using a resistor to minimize dc current commensurate with the desired level of performance. For low voltage applications, the ADL5354 is capable of operation at voltages as low as 3.3 V with substantially reduced current. For low voltage operation, an additional logic pin is provided to power down (approximately 300 μA) the circuit when desired.

The ADL5354 is fabricated using a BiCMOS high performance IC process. The device is available in a 6 mm × 6 mm, 36-lead LFCSP and operates over a −40°C to +85°C temperature range. An evaluation board is also available.

Key Features

RF frequency range of 2200 MHz to 2700 MHz
IF frequency range of 30 MHz to 450 MHz
Power conversion gain: 8.6 dB
SSB noise figure of 10.6 dB
Input IP3 of 26.1 dBm
Input P1dB of 10.6 dBm
Typical LO power of 0 dBm
Single-ended, 50 Ω RF and LO input ports
High isolation SPDT LO input switch
Single-supply operation: 3.3 V to 5 V
Exposed paddle, 6 mm × 6 mm, 36-lead LFCSP
1500 V HBM/500 V FICDM ESD performance

Application

Cellular base station receivers
Transmit observation receivers
Radio link downconverters

Specifications

Category	RF and WirelessRF Mixers	Series	-
RF Type	Cellular	Frequency	2.2GHz ~ 2.7GHz
Number of Mixers	2	Gain	14dB
Noise Figure	9.9dB	Secondary Attributes	-
Current - Supply	350mA	Voltage - Supply	3.3V ~ 5V
Mounting Type	Surface Mount	Base Product Number	ADL5354
Product Category	RF Mixer	RF Frequency	2200 MHz to 2700 MHz
Conversion Loss - Max	20 dB	NF - Noise Figure	10.6 dB
Maximum Operating Temperature	+ 85 C	Minimum Operating Temperature	- 40 C
Mounting Style	SMD/SMT	Development Kit	ADL5354-EVALZ
Maximum Operating Frequency	2700 MHz	Moisture Sensitive	Yes
Operating Supply Current	350 mA	Operating Supply Voltage	3.3 V to 5 V
Pd - Power Dissipation	2.2 W	Product Type	RF Mixer
Factory Pack Quantity	750	Subcategory	Wireless & RF Integrated Circuits
Technology	Si