This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

AT90S8515-8AI +BOM

The AT90S8515-8AI product from Microchip Technology offers high performance

Manufacturer:

Microchip
Mfr.Part #:

AT90S8515-8AI
Datasheet:

AT90S8515-8AI Datasheet (PDF)
Package/Case:

44-TQFP (10x10)
Product Type:

Microcontrollers
RoHS:
Lifecycle:

Obsolete
EDA/CAD Models:

Request Free CAD Models for AT90S8515-8AI

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AT90S8515-8AI General Description

Atmel's AT90S8515-8AI is an 8-bit microcontroller featuring a high-performance RISC architecture, 8K bytes of in-system programmable flash memory, 544 bytes of EEPROM, and 512 bytes of SRAM. With a maximum operating frequency of 8 MHz, it provides 32 general-purpose I/O lines, an 8-channel 10-bit ADC, and multiple communication interfaces such as UART, SPI, and I2C. Tailored for embedded applications requiring a high level of integration and versatility, this microcontroller is well-suited for a wide range of industrial, automotive, and consumer electronics applications. Housed in a 40-pin PDIP package, the AT90S8515-8AI can operate within a wide voltage range of 4.0V to 6.0V

Key Features

8K bytes of In-System Programmable Flash, 512 bytes EEPROM, 512 bytes SRAM, 32 general-purpose I/O lines, 32 general purpose working registers, flexible timer/counters with compare modes, internal and external interrupts, a programmable serial UART, programmable Watchdog Timer with internal oscillator, an SPI serial port and two software-selectable power-saving modes. The Idle Mode stops the CPU while allowing the SRAM, timer/counters, SPI port and interrupt system to continue functioning. The Power-down mode saves the register contents but freezes the oscillator, disabling all other chip functions until the next external interrupt or hardware reset.
Features
Utilizes the AVR® RISC Architecture
AVR – High-performance and Low-power RISC Architecture
– 118 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General-purpose Working Registers
– Up to 8 MIPS Throughput at 8 MHz
Data and Nonvolatile Program Memory
– 8K Bytes of In-System Programmable Flash Endurance: 1,000 Write/Erase Cycles
– 512 Bytes of SRAM
– 512 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles
– Programming Lock for Flash Program and EEPROM Data Security
Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler
– One 16-bit Timer/Counter with Separate Prescaler Compare, Capture Modes and Dual 8-, 9-, or 10-bit PWM
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– Programmable Serial UART
– Master/Slave SPI Serial Interface
Special Microcontroller Features
– Low-power Idle and Power-down Modes
– External and Internal Interrupt Sources
Specifications
– Low-power, High-speed CMOS Process Technology
– Fully Static Operation
Power Consumption at 4 MHz, 3V, 25°C
– Active: 3.0 mA
– Idle Mode: 1.0 mA
– Power-down Mode: <1 µA
I/O and Packages
– 32 Programmable I/O Lines
– 40-lead PDIP, 44-lead PLCC and TQFP
Operating Voltages
– 2.7 - 6.0V for AT90S8515-4
– 4.0 - 6.0V for AT90S8515-8
Speed Grades
– 0 - 4 MHz for AT90S8515-4
– 0 - 8 MHz for AT90S8515-8