This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

ATMEGA644P-20AU +BOM

AVR AVR® ATmega Microcontroller IC 8-Bit 20MHz 64KB (32K x 16) FLASH 44-TQFP (10x10)

ATMEGA644P-20AU General Description

In conclusion, the ATMEGA644P-20AU is a high-performance, low-power microcontroller that offers an impressive array of features and capabilities. Its combination of high-speed processing, extensive I/O options, analog signal conversion capabilities, and built-in protections make it an excellent choice for a wide range of embedded applications, from consumer electronics to industrial automation. Whether you're a hobbyist or a professional embedded systems developer, the ATMEGA644P-20AU has the features and performance to meet your needs

Key Features

  • High-performance, Low-power AVR® 8-bit Microcontroller
  • Advanced RISC Architecture
  • – 131 Powerful Instructions – Most Single-clock Cycle Execution
  • – 32 x 8 General Purpose Working Registers
  • – Fully Static Operation
  • – Up to 20 MIPS Throughput at 20 MHz
  • – On-chip 2-cycle Multiplier
  • Nonvolatile Program and Data Memories
  • – 16/32/64K Bytes of In-System Self-Programmable Flash
  • Endurance: 10,000 Write/Erase Cycles
  • – Optional Boot Code Section with Independent Lock Bits
  • In-System Programming by On-chip Boot Program
  • True Read-While-Write Operation
  • – 512B/1K/2K Bytes EEPROM
  • Endurance: 100,000 Write/Erase Cycles
  • – 1/2/4K Bytes Internal SRAM
  • – Programming Lock for Software Security
  • JTAG (IEEE std. 1149.1 Compliant) Interface
  • – Boundary-scan Capabilities According to the JTAG Standard
  • – Extensive On-chip Debug Support
  • – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
  • Peripheral Features
  • – Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
  • – One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
  • – Real Time Counter with Separate Oscillator
  • – Six PWM Channels
  • – 8-channel, 10-bit ADC
  • Differential mode with selectable gain at 1x, 10x or 200x
  • – Byte-oriented Two-wire Serial Interface
  • – Two Programmable Serial USART
  • – Master/Slave SPI Serial Interface
  • – Programmable Watchdog Timer with Separate On-chip Oscillator
  • – On-chip Analog Comparator
  • – Interrupt and Wake-up on Pin Change
  • Special Microcontroller Features
  • – Power-on Reset and Programmable Brown-out Detection
  • – Internal Calibrated RC Oscillator
  • – External and Internal Interrupt Sources
  • – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby
  • and Extended Standby
  • I/O and Packages
  • – 32 Programmable I/O Lines
  • – 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
  • Operating Voltages
  • – 1.8 - 5.5V for ATmega164P/324P/644PV
  • – 2.7 - 5.5V for ATmega164P/324P/644P
  • Speed Grades
  • – ATmega164P/324P/644PV: 0 - 4MHz @ 1.8 - 5.5V, 0 - 10MHz @ 2.7 - 5.5V
  • – ATmega164P/324P/644P: 0 - 10MHz @ 2.7 - 5.5V, 0 - 20MHz @ 4.5 - 5.5V
  • Power Consumption at 1 MHz, 1.8V, 25°C for ATmega164P/324P/644P
  • – Active: 338/398/TBD µA
  • – Power-down Mode:0.035 /0.027/TBD µA
  • – Power-save Mode:0.5 /0.5/TBD µA (Including 32 kHz RTC)

Specifications

Product Category 8-bit Microcontrollers - MCU Core AVR
Program Memory Size 64 kB Data RAM Size 4 kB
Maximum Clock Frequency 20 MHz ADC Resolution 10 bit
Number of I/Os 32 I/O Supply Voltage - Min 2.7 V
Supply Voltage - Max 5.5 V Mounting Style SMD/SMT
Data Bus Width 8 bit Minimum Operating Temperature - 40 C
Maximum Operating Temperature + 85 C Series ATmega644P
Packaging [ "Tray" ] Data RAM Type SRAM
Data ROM Size 2 kB Data ROM Type EEPROM
Height 1 mm Interface Type 2-Wire, SPI, UART
Length 10 mm Moisture Sensitive Yes
Number of Timers/Counters 3 Timer Processor Series megaAVR
Product MCUs Product Type 8-bit Microcontrollers - MCU
Program Memory Type Flash Factory Pack Quantity 160
Subcategory Microcontrollers - MCU Tradename AVR
Width 10 mm Unit Weight 0.077179 oz

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Reviews

You need to log in to reply. Sign In | Sign Up