This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ATWINC1510-MR210PB1952 +BOM

Compact and efficient wireless connectivity solution for IoT applications

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

ATWINC1510-MR210PB1952
Datasheet:

ATWINC1510-MR210PB1952 Datasheet (PDF)
Programmable:

Not Verified
RF Family/Standard:

WiFi
Protocol:

802.11b/g/n
Modulation:

16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
EDA/CAD Models:

Request Free CAD Models for ATWINC1510-MR210PB1952

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ATWINC1510-MR210PB1952 General Description

One of the standout features of the ATWINC1510-MR210PB1952 is its small form factor and low power consumption, making it an ideal choice for battery-powered IoT devices that require long battery life. Furthermore, its built-in power management unit enables low-power operation in sleep modes, further extending its battery life

Key Features

IEEE 802.11 b/g/n 20MHz (1x1) solution, single spatial stream in 2.4GHz ISM band
Integrated transmit/receive switch, fast boot options, on-chip network stack to offload MCU
Superior sensitivity and range via advanced PHY signal processing
FCC, IC, CE regulatory certification, advanced carrier and timing synchronization
Advanced equalization and channel estimation, no OTA/with shield, Wi-Fi direct and soft-AP support
Power save modes (4µA power down mode typical at 3.3V I/O), 3V to 4.2V VBATT voltage
Supports IEEE 802.11 WEP, WPA, WPA2 security and -40°C to +85°C operating temperature
On-chip memory management engine to reduce host load, built-in 26MHz crystal
2.7V to 3.6V I/O operating voltage, Wi-Fi alliance certifications for connectivity and optimizations
Integrated flash memory for system software

Microchip Technology, Inc Original Stock

Application

Embedded Design & Development

Specifications

Category	RF and WirelessRF Transceiver Modules and Modems	Series	-
Programmable	Not Verified	RF Family/Standard	WiFi
Protocol	802.11b/g/n	Modulation	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
Frequency	2.4GHz	Data Rate	72.2Mbps
Power - Output	18.5dBm	Sensitivity	-95dBm
Serial Interfaces	I²C, SPI, UART	Antenna Type	Integrated, Trace
Utilized IC / Part	-	Memory Size	8MB Flash, 128kB RAM
Voltage - Supply	2.7V ~ 3.6V	Current - Receiving	61mA
Current - Transmitting	265mA	Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 85°C	Firmware Version	19.5.2
Base Product Number	ATWINC1510	Programmabe	Not Verified

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

C**a 08/29/2023

Mikruha original, at least resistance 3,19 uf. Came in the usual package. The diagram shows the remains of thermal paste

I**a 01/26/2023

Great set. Came quickly

Z**r 06/08/2020

On the appearance of the board quality, the propane is good, came in integrity, packed was good. I haven't checked in yet.Also pleases the return of part of the cost of the goods (up to 18%), it is only necessary to register for a keshback service: epngo * bz/cashback_index/wo4bll (* replace with. ). Return is carried out either on a bank card, or on webmoney, yandex money or on the phone account. Checked, enumerations are executed properly, without any commissions.