Payment Method
CXP82832 +BOM
The CXP82832 microcontroller is designed for high-performance computing tasks with its advanced CMOS technology."
QFP100-
Manufacturer:
SONY CORP
-
Mfr.Part #:
CXP82832
-
Datasheet:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Active
-
Pin Count:
100
-
HTS Code:
8542.31.00.01
-
EDA/CAD Models:
Availability: 7072 PCS
Please fill in the short form below and we will provide you the quotation immediately.
CXP82832 General Description
DescriptionThe CXP82832/82840/82852/82860 is a CMOS 8-bit single chip microcomputer integrating on a single chip an A/D converter, serial interface, timer/counter, time base timer, capture timer/counter, fluorescent display panel controller/driver, remote control reception circuit, and PWM output besides the basic configurations of 8-bit CPU, ROM, RAM, and I/O port.Features• Wide-range instruction system (213 instructions) to cover various types of data— 16-bit arithmetic/multiplication and division/boolean bit operation instructions• Minimum instruction cycle 400ns at 10MHz operation (122µs at 32kHz operation)• Incorporated ROM capacity 32K bytes (CXP82832) 40K bytes (CXP82840) 52K bytes (CXP82852) 60K bytes (CXP82860)• Incorporated RAM capacity 1536 bytes (including fluorescent display area)• Peripheral functions— A/D converter 8 bits, 8 channels, successive approximation method(Conversion time of 32µs/10MHz)— Serial interface 8-bit, 8-stage FIFO incorporated (Auto transfer for 1 to 8 bytes), 1 channel 8-bit clock synchronized type, 1 channel— Timers 8-bit timer, 8-bit timer/counter, 19-bit time base timer 16-bit capture timer/counter, 32kHz timer/counter— Fluorescent display panel controller/driver Supports the universal grid fluorescent display panel. High voltage drive output port of 56 pins (40V) Maximum of 640 segments display possibleDisplay timing number of 1 to 20 Dimmer function Incorporated pull-down resistor (Mask option) Hardware key scan function (Maximum of 16 × 8 key matrix supportable)— Remote control reception circuit 8-bit pulse measurement counter, 6-stage FIFO— PWM output 14 bits, 1 channel• Interruption 16 factors, 15 vectors, multi-interruption possible• Standby mode SLEEP/STOP• Package 100-pin plastic QFP• Piggyback/evaluation chip CXP82800 100-pin ceramic QFP
Key Features
- Wide-range instruction system (213 instructions) to cover various types of data
- — 16-bit arithmetic/multiplication and division/boolean bit operation instructions
- Minimum instruction cycle 400ns at 10MHz operation
- (122µs at 32kHz operation)
- Incorporated ROM capacity
- 32K bytes (CXP82832)
- 40K bytes (CXP82840)
- 52K bytes (CXP82852)
- 60K bytes (CXP82860)
- Incorporated RAM capacity 1536 bytes (including fluorescent display area)
- Peripheral functions
- — A/D converter
- 8 bits, 8 channels, successive approximation method(Conversion time of 32µs/10MHz)
- — Serial interface
- 8-bit, 8-stage FIFO incorporated (Auto transfer for 1 to 8 bytes), 1 channel 8-bit clock synchronized type, 1 channel
- — Timers
- 8-bit timer, 8-bit timer/counter, 19-bit time base timer 16-bit capture timer/counter, 32kHz timer/counter
- — Fluorescent display panel controller/driver
- Supports the universal grid fluorescent display panel. High voltage drive output port of 56 pins (40V) Maximum of 640 segments display possibleDisplay timing number of 1 to 20 Dimmer function Incorporated pull-down resistor (Mask option) Hardware key scan function (Maximum of 16 × 8 key matrix supportable)
- — Remote control reception circuit
- 8-bit pulse measurement counter, 6-stage FIFO
- — PWM output
- 14 bits, 1 channel
- Interruption 16 factors, 15 vectors, multi-interruption possible
- Standby mode SLEEP/STOP
- Package 100-pin plastic QFP
- Piggyback/evaluation chip CXP82800 100-pin ceramic QFP
Specifications
Pbfree Code | Yes | Part Life Cycle Code | Active |
Pin Count | 100 | Reach Compliance Code | |
HTS Code | 8542.31.00.01 | Has ADC | YES |
Address Bus Width | Bit Size | 8 | |
Clock Frequency-Max | 10 MHz | DAC Channels | NO |
DMA Channels | NO | External Data Bus Width | |
JESD-30 Code | R-PDSO-G100 | JESD-609 Code | e6/e4 |
Length | 20 mm | Number of I/O Lines | 64 |
Number of Terminals | 100 | Operating Temperature-Max | 75 °C |
Operating Temperature-Min | -20 °C | PWM Channels | YES |
Peak Reflow Temperature (Cel) | 260 | Qualification Status | Not Qualified |
ROM Programmability | MROM | Supply Voltage-Max | 5.5 V |
Supply Voltage-Min | 4.5 V | Supply Voltage-Nom | 5 V |
Surface Mount | YES | Technology | CMOS |
Temperature Grade | COMMERCIAL EXTENDED | Terminal Finish | TIN BISMUTH/PALLADIUM |
Terminal Form | GULL WING | Terminal Pitch | 0.65 mm |
Terminal Position | QUAD | Time@Peak Reflow Temperature-Max (s) | 10 |
Width | 14 mm | uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,072
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for CXP82832, guaranteed quotes back within 12hr.