This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

CY8C5568AXI-060 +BOM

MCU 32-bit CY8Cxxx ARM Cortex M3 RISC 256KB Flash 2.5V/3.3V/5V 100-Pin TQFP

Manufacturer:

INFINEON
Mfr.Part #:

CY8C5568AXI-060
Datasheet:

CY8C5568AXI-060 Datasheet (PDF)
Programmabe:

Not Verified
Core Processor:

ARM® Cortex®-M3
Core Size:

32-Bit Single-Core
Speed:

67MHz
EDA/CAD Models:

Request Free CAD Models for CY8C5568AXI-060

CY8C5568AXI-060 General Description

Featuring 64KB of RAM memory and a CPU speed of 67MHz, the CY8C5568AXI-060 is capable of handling complex tasks efficiently. It includes an external and internal oscillator type, along with 4 timers and various peripherals such as ADC, Comparator, LCD Driver, PWM, and Timer. The embedded interface supports I2C, SPI, UART, and USB connectivity for seamless integration into existing systems

Key Features

32-bit ARM Cortex-M3 CPU core
DC to 40 MHz operation
Flash program memory, up to 256 KB, 100,000 write cycles, 20-year retention and multiple security features
Up to 64 KB SRAM memory
2-KB electrically erasable programmable read-only memory (EEPROM) memory, 1 million cycles, and 20 years retention
24-channel direct memory access (DMA) with multilayer AMBA high-performance bus (AHB) bus access
Programmable chained descriptors and priorities
High bandwidth 32-bit transfer support
Low voltage, ultra low power
Operating voltage range: 2.7 V to 5.5 V
High efficiency boost regulator from 1.8-V input to 5.0-V output
5 mA at 6 MHz
Low power modes including:
3-µA sleep mode with real time clock (RTC) and low-voltage detect (LVD) interrupt
1-µA hibernate mode with RAM retention
Versatile I/O system
28 to 72 I/Os (62 GPIOs, eight SIOs, two USBIOs[1])
Any GPIO to any digital or analog peripheral routability
LCD direct drive from any GPIO, up to 46 × 16 segments
CapSense® support from any GPIO[2]
1.2 V to 5.5 V I/O interface voltages, up to four domains
Maskable, independent IRQ on any pin or port
Schmitt trigger transistor-transistor logic (TTL) inputs
All GPIOs configurable as open drain high/low, pull up/down, High-Z, or strong output
25 mA sink on SIO
Digital peripherals
20 to 24 programmable logic device (PLD) based universal digital blocks (UDBs)
Full CAN 2.0b 16 RX, 8 TX buffers[1]
Full-Speed (FS) USB 2.0 12 Mbps using internal oscillator[1]
Four 16-bit configurable timer, counter, and PWM blocks
Library of standard peripherals
8-, 16-, 24-, and 32-bit timers, counters, and PWMs
SPI, UART, and I2C
Many others available in catalog
Library of advanced peripherals
Cyclic redundancy check (CRC)
Pseudo random sequence (PRS) generator
Local interconnect network (LIN) bus 2.0
Quadrature decoder
Analog peripherals (2.7 V ≤ VDDA ≤ 5.5 V)
1.024 V ±1% internal voltage reference across –40 °C to +85 °C (128 ppm/°C)
Successive approximation register (SAR) analog-to-digital converter (ADC), 12-bit at 1 Msps
One 8-bit, 8-Msps current DAC (IDAC) or 1-Msps voltage DAC (VDAC)
Two comparators with 95-ns response time
CapSense support
Programming, debug, and trace
Serial wire debug (SWD) and single-wire viewer (SWV) interfaces
Cortex-M3 flash patch and breakpoint (FPB) block
Cortex-M3 data watchpoint and trace (DWT) generates data trace information
Cortex-M3 Instrumentation Trace Macrocell (ITM) can be used for printf-style debugging
DWT and ITM blocks communicate with off-chip debug and trace systems via the SWV interface
Bootloader programming supportable through I2C, SPI, UART, USB, and other interfaces
Precision, programmable clocking
3 to 24 MHz internal oscillator over full temperature and voltage range
4 to 25 MHz crystal oscillator for crystal PPM accuracy
Internal PLL clock generation up to 40 MHz
32.768 KHz watch crystal oscillator
Low power internal oscillator at 1, 33, and 100 kHz
Temperature and packaging
–40 °C to +85 °C degrees industrial temperature
68-pin QFN and 100-pin TQFP package options

Specifications

Programmabe	Not Verified	Core Processor	ARM® Cortex®-M3
Core Size	32-Bit Single-Core	Speed	67MHz
Connectivity	I²C, LINbus, SPI, UART/USART, USB	Peripherals	CapSense, DMA, LCD, POR, PWM, WDT
Number of I/O	60	Program Memory Size	256KB (256K x 8)
Program Memory Type	FLASH	EEPROM Size	2K x 8
RAM Size	64K x 8	Voltage - Supply (Vcc/Vdd)	2.7V ~ 5.5V
Data Converters	A/D 1x20b, 2x12b; D/A 4x8b	Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)	Mounting Type	Surface Mount