This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

DM9000CIEP +BOM

Advanced multi-protocol interface for fast data transmission

Manufacturer:

DAVICOM SEMICONDUCTOR INC
Mfr.Part #:

DM9000CIEP
Datasheet:

DM9000CIEP Datasheet (PDF)
Part Life Cycle Code:

Contact Manufacturer
HTS Code:

8542.31.00.01
Additional Feature:

ALSO SUPPORTS IEEE802.3X, IEEE802.3
Boundary Scan:

NO
EDA/CAD Models:

Request Free CAD Models for DM9000CIEP

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

DM9000CIEP General Description

The DM9000 is a fully integrated and cost-effective single chip Fast Ethernet MAC controller with a general processor interface, a 10/100M PHY and 4K Dword SRAM. It is designed with low power and high performance process that support 3.3V with 5V tolerance.

Key Features

Supports processor interface: byte/word/dword of I/O command to internal memory data operation

Integrated 10/100M transceiver

Supports MII and reverses MII interface

Supports back pressure mode for half-duplex mode flow control

IEEE802.3x flow control for full-duplex mode

Supports wakeup frame, link status change and magic packet events for remote wake up

Integrated 4K dword SRAM

Supports automatically load vendor ID and product ID from EEPROM

Supports 4 GPIO pins

Optional EEPROM configuration

Very low power consumption mode:

Power reduced mode (cable detection)

Power down mode

Selectable TX drivers for 1:1 or 1.25:1 transformers for additional power reduction.

Compatible with 3.3V and 5.0V tolerant I/O

100-pin LQFP with CMOS process

Specifications

Part Life Cycle Code	Contact Manufacturer	Reach Compliance Code
HTS Code	8542.31.00.01	Additional Feature	ALSO SUPPORTS IEEE802.3X, IEEE802.3
Address Bus Width		Boundary Scan	NO
Communication Protocol	SYNC, BIT, BYTE, ETHERNET	Data Encoding/Decoding Method	NRZ; NRZI; BIPH-LEVEL(MANCHESTER)
Data Transfer Rate-Max	12.5 MBps	External Data Bus Width	16
JESD-30 Code	S-PQFP-G48	Length	7 mm
Low Power Mode	YES	Number of Serial I/Os	2
Number of Terminals	48	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Seated Height-Max	1.6 mm
Supply Voltage-Max	3.465 V	Supply Voltage-Min	3.135 V
Supply Voltage-Nom	3.3 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Form	GULL WING	Terminal Pitch	0.5 mm
Terminal Position	QUAD	Width	7 mm
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL