Payment Method
DSPIC33FJ32GP304-I/PT +BOM
Fast execution speed for demanding signal processing tasks
TQFP-44-
Manufacturer:
-
Mfr.Part #:
DSPIC33FJ32GP304-I/PT
-
Datasheet:
-
Series:
dsPIC 33F
-
Packaging:
Tray Alternate Packaging
-
Operating-Temperature:
-40°C ~ 85°C (TA)
-
Number-of-I-O:
35
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on DSPIC33FJ32GP304-I/PT. Guaranteed response within 12hr.
Availability: 3252 PCS
Please fill in the short form below and we will provide you the quotation immediately.
DSPIC33FJ32GP304-I/PT General Description
dsPIC dsPIC™ 33F Microcontroller IC 16-Bit 40 MIPs 32KB (32K x 8) FLASH 44-TQFP (10x10)
Key Features
- Operating Range
- Up to 40 MIPS operation (at 3.0-3.6V)
- 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
- 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
- High-Performance dsPIC33FJ core
- Modified Harvard architecture
- C compiler optimized instruction set
- 24-bit wide instructions, 16-bit wide data path
- Linear program memory addressing up to 4M instruction words
- Linear data memory addressing up to 64 Kbytes
- Two 40-bit accumulators with rounding and saturation options
- Indirect, Modulo and Bit-reversed addressing modes
- 16 x 16 fractional/integer multiply operations
- 32/16 and 16/16 divide operations
- Single-cycle multiply and accumulate (MAC) with accumulator write back and dual data fetch
- Single-cycle MUL plus hardware divide
- Up to ±16-bit shifts for up to 40-bit data
- On-chip Flash and SRAM
- Direct Memory Access (DMA)
- 8-channel hardare DMA
- Up to 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA
- Most peripherals support DMA
- Timers/Capture/Compare/PWM
- Up to five 16-bit and up to two 32-bit Timers/Counters
- One timer runs as a Real-Time Clock with an external 32.768 kHz oscillator
- Input Capture (up to four channels) with Capture on up, down or both edges
- 16-bit capture input functions
- 4-deep FIFO on each capture
- Output Compare (up to four channels) with Single or Dual 16-bit Compare mode and 16-bit Glitchless PWM mode
- Hardware Real-Time Clock/Calendar (RTCC)
- Interrupt Controller
- 5-cycle latency
- 118 interrupt vectors
- Up to 49 available interrupt sources
- Up to three external interrups
- Seven programmable priority levels
- Five processor exceptions
- Digital I/O
- Peripheral pin Select functionality
- Up to 35 programmable digital I/O pins
- Wake-up/Interrupt-on-Change for up to 21 pins
- Output pins can drive from 3.0V to 3.6V
- Up to 5V output with open drain configuration
- All digital input pins are 5V tolerant
- 4 mA sink on all I/O pins
- System Management
- Flexible clock options: External, crystal, resonator and internal RC
- Fully integrated Phase-Locked Loop (PLL)
- Extremely low jitter PLL
- Power-up Timer
- Oscillator Start-up Timer/Stabilizer
- Watchdog Timer with its own RC oscillator
- Fail-Safe Clock Monitor
- Reset by multiple sources
- Power Management
- On-chip 2.5V voltage regulator
- Switch between clock sources in real time
- Idle, Sleep, and Doze modes with fast wake-up
- Analog-to-Digital Converters (ADCs)
- 10-bit, 11 Msps or 12-bit, 500 Ksps conversion:
- Two and four simultaneous samples (10-bit ADC)
- Up to 13 input channels with auto-scanning
- Conversion start can be manual or synchronized with one of four trigger sources
- Conversion possible in Sleep mode
- Other Analog Peripherals
- Two analog comparators with programmable input/output configuration
- 4-bit DAC with two ranges for analog comparators
- 16-bit dual channel 100 Ksps audio DAC
- Data Converter Interface (DCI) module
- Codec interface
- Supports I2S and AC.97 protocols
- Up to 16-bit data words, up to 16 words per frame
- 4-word deep TX and RX buffers
- Communication Modules
- 4-wire SPI (up to two modules) with I/O interface to simple codecs
- I2C™ with Full Multi-Master Slave mode support, slave address masking, 7-bit and 10-bit addressing, integrated signal conditioning and bus collision detection
- UART (up to two modules) with LIN bus support, IrDA® and hardware flow control with CTS and RTS
- Parallel Master Slave Port (PMP/EPSP)
- Programmable Cyclic Redundancy Check (CRC)
- Debugger Development Support
- In-circuit and in-application programming
- Two program breakpoints
- Trace and run-time watch
Specifications
Product Category | Embedded - Microcontrollers | Series | dsPIC 33F |
Packaging | Tray Alternate Packaging | Operating-Temperature | -40°C ~ 85°C (TA) |
Number-of-I-O | 35 | Speed | 40 MIPs |
EEPROM-Size | - | Core-Processor | dsPIC |
RAM-Size | 4K x 8 | Program-Memory-Type | FLASH |
Peripherals | Brown-out Detect/Reset, DCI, DMA, I2S, POR, PWM, WDT | Connectivity | I2C, IrDA, LIN, SPI, UART/USART |
Voltage-Supply-Vcc-Vdd | 3 V ~ 3.6 V | Core-Size | 16-Bit |
Program-Memory-Size | 32KB (32K x 8) | Data-Converters | A/D 13x10b/12b |
Oscillator-Type | Internal | Tags | dsPIC33FJ32GP304, dsPIC33FJ32GP3, dsPIC33FJ32GP, dsPIC33FJ32G, dsPIC33FJ3, dsPIC33FJ, dsPIC33F, dsPIC33, dsPIC3, dsPIC, dsPI, DSP |
Programmabe | Not Verified | Core Processor | dsPIC |
Core Size | 16-Bit | Number of I/O | 35 |
Program Memory Size | 32KB (32K x 8) | Program Memory Type | FLASH |
EEPROM Size | - | RAM Size | 4K x 8 |
Voltage - Supply (Vcc/Vdd) | 3V ~ 3.6V | Data Converters | A/D 13x10b/12b |
Oscillator Type | Internal | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Base Product Number | DSPIC33FJ32GP304 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 3,252
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $3.372 | $3.37 |
10+ | $2.964 | $29.64 |
30+ | $2.722 | $81.66 |
100+ | $2.476 | $247.60 |
500+ | $2.362 | $1,181.00 |
1000+ | $2.311 | $2,311.00 |
The prices below are for reference only.