Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
IC CYCLONE FPGA 15408 CELLS 60NM 484-PIN FBGA
BGAManufacturer:
Mfr.Part #:
EP4CE15F23C8N
Datasheet:
Series:
EP4CE15 Cyclone IV E
Number Of Logic Elements:
15408 LE
Embedded Memory:
504 kbit
Number Of I/Os:
343 I/O
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on EP4CE15F23C8N. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
Built to deliver exceptional performance in demanding environments, the EP4CE15F23C8N FPGA is a key component for applications requiring high-speed data processing and efficient algorithm execution. With a compact form factor in a 484-pin FBGA package, this device is well-suited for space-constrained designs without compromising on capabilities. Featuring 178 user I/O pins, built-in PLLs, on-chip memory, and DSP blocks, the EP4CE15F23C8N offers a comprehensive solution for designers looking to push the boundaries of innovation in various industries
The Cyclone IV device family offers the following features:
Low-cost, low-power FPGA fabric:
6K to 150K logic elements
Up to 6.3 Mb of embedded memory
Up to 360 1818 multipliers for DSP processing intensive applications
Protocol bridging applications for under 1.5 W total power
Cyclone IV GX devices offer up to eight high-speed transceivers that provide:
Data rates up to 3.125 Gbps
8B/10B encoder/decoder
8-bit or 10-bit physical media attachment (PMA) to physical coding sublayer (PCS) interface
Byte serializer/deserializer (SERDES)
Word aligner
Rate matching FIFO
TX bit slipper for Common Public Radio Interface (CPRI)
Electrical idle
Dynamic channel reconfiguration allowing you to change data rates andprotocols on-the-fly
Static equalization and pre-emphasis for superior signal integrity
150 mW per channel power consumption
Flexible clocking structure to support multiple protocols in a single transceiver block
Cyclone IV GX devices offer dedicated hard IP for PCI Express (PIPE) (PCIe) Gen 1:
1, 2, and 4 lane configurations
End-point and root-port configurations
Up to 256-byte payload
One virtual channel
2 KB retry buffer
4 KB receiver (Rx) buffer
Cyclone IV GX devices offer a wide range of protocol support:
PCIe (PIPE) Gen 1 1, 2, and 4 (2.5 Gbps)
Gigabit Ethernet (1.25 Gbps)
CPRI (up to 3.072 Gbps)
XAUI (3.125 Gbps)
Triple rate serial digital interface (SDI) (up to 2.97 Gbps)
Serial RapidIO (3.125 Gbps)
Basic mode (up to 3.125 Gbps)
V-by-One (up to 3.0 Gbps)
DisplayPort (2.7 Gbps)
Serial Advanced Technology Attachment (SATA) (up to 3.0 Gbps)
OBSAI (up to 3.072 Gbps)
Up to 532 user I/Os
LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx
Support for DDR2 SDRAM interfaces up to 200 MHz
Support for QDRII SRAM and DDR SDRAM up to 167 MHz
Up to eight phase-locked loops (PLLs) per device
Offered in commercial and industrial temperature grades
Altera’s new Cyclone® IV FPGA device family extends the Cyclone FPGA series leadership in providing the market’s lowest-cost, lowest-power FPGAs, now with a transceiver variant. Cyclone IV devices are targeted to high-volume, cost-sensitive applications, enabling system designers to meet increasing bandwidth requirements while lowering costs.
Product Category | FPGA - Field Programmable Gate Array | Series | EP4CE15 Cyclone IV E |
Number of Logic Elements | 15408 LE | Embedded Memory | 504 kbit |
Number of I/Os | 343 I/O | Supply Voltage - Min | 1.15 V |
Supply Voltage - Max | 1.25 V | Minimum Operating Temperature | 0 C |
Maximum Operating Temperature | + 85 C | Mounting Style | SMD/SMT |
Maximum Operating Frequency | 200 MHz | Moisture Sensitive | Yes |
Number of Logic Array Blocks - LABs | 963 LAB | Operating Supply Voltage | 1.2 V |
Product Type | FPGA - Field Programmable Gate Array | Factory Pack Quantity | 60 |
Subcategory | Programmable Logic ICs | Total Memory | 504 kbit |
Tradename | Cyclone IV | Part # Aliases | 971152 |
Unit Weight | 0.077955 oz |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $15.468 | $15.47 |
10+ | $14.811 | $148.11 |
30+ | $13.673 | $410.19 |
100+ | $12.681 | $1,268.10 |
The prices below are for reference only.