Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Power Switch/Driver 1:1 P-Channel 1.5A 6-WLCSP (0.96x1.66)
WLCSP-6Manufacturer:
Mfr.Part #:
FPF2195
Datasheet:
Case Outline:
567RN
MSL Temp (°C):
260
Container Type:
REEL
EDA/CAD Models:
Please fill in the short form below and we will provide you the quotation immediately.
The FPF2195 load switch provides full protection to systems and loads that may encounter large current conditions. These devices contain a 55mΩ current-limited Pchannel MOSFET that can operate over an input voltage range of 1.8 to 5.5V. Internally, current is prevented from flowing when the MOSFET is off and the output voltage is higher than the input voltage. Switch control is by a logic input (ON) capable of interfacing directly with low-voltage control signals. Each part contains thermal shutdown protection that shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the parts operate in a constant-current mode to prohibit excessive currents from causing damage. The FPF2195 does not turn off after a current limit fault, but remains in the constant-current mode indefinitely. The minimum current limit is 100mA. These parts are available in a space-saving six ball advanced 1 x 1.5mm WLCSP package.
• <1.8 to 5.5 V Input Voltage Range
• Controlled Turn−On
• 0.1 to 1.5 A Adjustable Current Limit
• Under−Voltage Lockout
• Thermal Shutdown
• <2 A Shutdown Current
• Auto Restart
• Fast Current Limit Response Time
• 5 s to Moderate Over Currents
• 30 ns to Hard Shorts
• Fault Blanking
• Reverse Current Blocking
• PDAs
• Cell Phones
• Handheld GPS Devices
• Portable Enterprise / Industrial Devices
• Digital Cameras
• Peripheral Ports and Accessories
• Portable Medical Equipment
• Hot Swap Supplies
Status | Active | Case Outline | 567RN |
MSL Temp (°C) | 260 | Container Type | REEL |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.842 | $0.84 |
10+ | $0.822 | $8.22 |
30+ | $0.811 | $24.33 |
100+ | $0.798 | $79.80 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for FPF2195, guaranteed quotes back within
12hr.
I took for a double-sided with a free discount-i wanted to take more-and i was sold for it.Great bp!Thanks to the seller!