Payment Method
FXMA2102UMX +BOM
Dual Supply 2-Bit Voltage Translator/Buffer/Repeater Isolator for I2C Applications
UQFN-
Manufacturer:
-
Mfr.Part #:
FXMA2102UMX
-
Datasheet:
-
Case Outline:
523AS
-
MSL Temp (°C):
260
-
Container Type:
REEL
-
EDA/CAD Models:
Availability: 6204 PCS
Please fill in the short form below and we will provide you the quotation immediately.
FXMA2102UMX General Description
The FXMA2102 is a high-performance configurable dual-voltage-supply translator for bi-directional voltage translation over a wide range of input and output voltages levels.Intended for use as a voltage translator in applications using the I2C bus interface, the input and output voltage levels are compatible with I2C device specification voltage levels. External pull-up resistors are required.The device is designed so that the A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional A/B port voltage translation between any two levels from 1.65V to 5.5V. VCCA can equal VCCB from 1.65V to 5.5V. The OE pin is referenced to VCCA.Either VCC can be powered-up first. Internal power-down control circuits place the device in 3-state if either VCC is removed.The two ports of the device have automatic direction sense capability. Either port may sense an input signal and transfer it as an output signal to the other port.
Key Features
• Bi−Directional Interface between Any Two Levels: 1.65 V to 5.5 V
• Direction Control not Needed
• System GPIO Resources Not Required when OE Tied to VCCA
• I²C 400 pF Buffer / Repeater
• I²C Bus Isolation
• A/B Port VOL = 175 mV (Typical), VIL = 150 mV, IOL = 6 mA
• Open−Drain Inputs / Outputs
• Accommodates Standard−Mode and Fast−Mode I2C−Bus Devices
• Supports I²C Clock Stretching & Multi−Master
• Fully Configurable: Inputs and Outputs Track VCC
• Control Input (OE) Referenced to VCCA.
• Non−Preferential Power−Up; Either VCC May Be Powered−Up First
• Outputs Switch to 3−State if Either VCC is at GND
• Tolerant Output Enable: 5 V
• Packaged in 8−Terminal Leadless MicroPak (1.6 mm x 1.6 mm) and Ultrathin MLP (1.2 mm x 1.4 mm)
• ESD Protection Exceeds:
♦ 8 kV HBM ESD (per JESD22−A114)
♦ 2 kV CDM (per JESD22− C101)
Application
- This product is general usage and suitable for many different applications.
Specifications
Status | Active | Case Outline | 523AS |
MSL Temp (°C) | 260 | Container Type | REEL |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
FXMA2102UMX Datasheet PDF
FXMA2102UMX PDF Preview
In Stock: 6,204
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for FXMA2102UMX, guaranteed quotes back within 12hr.
Top Sellers
-
NL17SZ08DFT2G
onsemi
9000+ $0.034
-
FXMA2102L8X
ON Semiconductor, LLC
Dual Supply 2-Bit Voltage Translator/Buffer/Repeater Isolator for I2C Applications
-
FXMAR2102L8X
ON Semiconductor, LLC
Dual Supply 2-Bit Voltage Translator/ Isolator for I2C Applications
-
MC14017BCP
ONSEMI
DUAL POSITIVE EDGE UP Not Qualified divider circuit 125C 2000000Hz 10mA 18V
-
CD4093BCN
onsemi
NAND Gate 4-Element 2-IN CMOS 14-Pin PDIP Rail
80 days in astrakhan region. Thank you to the seller.