This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HAL506SF-A +BOM

HAL506SF-A: Board Mount Hall Effect/Magnetic Sensors, suggested alternate option: 586-HAL1503UA-A

Manufacturer:

TDK-Micronas GmbH
Mfr.Part #:

HAL506SF-A
Datasheet:

HAL506SF-A Datasheet (PDF)
Function:

Unipolar Switch
Technology:

Hall Effect
Polarization:

South Pole
Sensing Range:

7.2mT Trip, 2mT Release
EDA/CAD Models:

Request Free CAD Models for HAL506SF-A

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HAL506SF-A General Description

Digital Switch Unipolar Switch Open Drain Hall Effect SOT-89B-1

Key Features

– switching offset compensation at typically 62 kHz
– operates from 3.8 V to 24 V supply voltage
– overvoltage protection at all pins
– reverse-voltage protection at VDD-pin
– magnetic characteristics are robust regarding mechanical stress effects
– short-circuit protected open-drain output by thermal shut down
– operates with static magnetic fields and dynamic magnetic fields up to 10 kHz
– constant switching points over a wide supply voltage range
– the decrease of magnetic flux density caused by rising temperature in the sensor system is compensated by a built-in negative temperature coefficient of the magnetic characteristics
– ideal sensor for applications in extreme automotive and industrial environments
– EMC corresponding to ISO 7637

Application

The Micronas HAL506SF-A is a Hall effect latch/switch with a sensing range of 7.2mT trip and 2mT release. It has an output voltage of 24V and a maximum output current of 20mA. It is packaged in a SOT-89B-1, SOT-89-4, and TO-243AA variant. The output type is open drain and the operating temperature range is -40°C to +125°C.This device is suitable for a variety of applications, including automotive, industrial, and consumer electronics. It can be used for position sensing, speed sensing, current sensing, and magnetic field sensing. It is also suitable for use in motor control, power management, and safety systems.

Specifications

Function	Unipolar Switch	Technology	Hall Effect
Polarization	South Pole	Sensing Range	7.2mT Trip, 2mT Release
Test Condition	25°C	Voltage - Supply	3.8V ~ 24V
Current - Supply (Max)	4.2mA	Current - Output (Max)	20mA
Output Type	Open Drain	Features	Temperature Compensated
Operating Temperature	-40°C ~ 170°C (TJ)	Mounting Type	Surface Mount