This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

INA180A2QDBVRQ1 +BOM

AEC-Q100, 26V, 350kHz current sense amplifier

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

INA180A2QDBVRQ1
Datasheet:

INA180A2QDBVRQ1 Datasheet (PDF)
Common-mode Voltage (max) (V):

26
Common-mode Voltage (min) (V):

-0.2
Input Offset (±) (max) (µV):

150
Input Offset Drift (±) (typ) (µV/°C):

0.2
EDA/CAD Models:

Request Free CAD Models for INA180A2QDBVRQ1

INA180A2QDBVRQ1 General Description

The INA180 -Q1, INA2180 -Q1, and INA4180 -Q1 (INAx180 -Q1) current sense amplifiers are designed for cost-optimized applications. These devices are part of a family of current-sense amplifiers (also called current-shunt monitors) that sense voltage drops across current-sense resistors at common-mode voltages from –0.2 V to +26 V, independent of the supply voltage. The INAx180 -Q1 integrate a matched resistor gain network in four, fixed-gain device options: 20 V/V, 50 V/V, 100 V/V, or 200 V/V. This matched gain resistor network minimizes gain error and reduces the temperature drift.

All these devices operate from a single 2.7-V to 5.5-V power supply. The single-channel INA180 -Q1 draws a maximum supply current of 260 µA; whereas, the dual-channel INA2180 -Q1 draws a maximum supply current of 500 µA, and the quad channel draws a maximum supply current of 900 µA.

The INA180 -Q1 is available in a 5-pin, SOT-23 package with two different pin configurations. The INA2180 -Q1 is available in a 8-pin, VSSOP package. The INA4180 -Q1 is available in a 14-pin, TSSOP package. All device options are specified over the extended operating temperature range of –40°C to +125°C.

Key Features

AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C ≤ T_A ≤ +125°C
- HBM ESD classification level 2
- CDM ESD classification level C6
Functional Safety-Capable
- Documentation available to aid functional safety system design
Common-mode range (V_CM): –0.2 V to +26 V
High bandwidth: 350 kHz (A1 devices)
Offset voltage:
- ±150 µV (maximum) at V_CM = 0 V
- ±500 µV (maximum) at V_CM = 12 V
Output slew rate: 2 V/µs
Accuracy:
- ±1% gain error (maximum)
- 1-µV/°C offset drift (maximum)
Gain options:
- 20 V/V (A1 devices)
- 50 V/V (A2 devices)
- 100 V/V (A3 devices)
- 200 V/V (A4 devices)
Quiescent current: 260 µA maximum (INA180-Q1)

Specifications

Product type	Analog output	Common-mode voltage (max) (V)	26
Common-mode voltage (min) (V)	-0.2	Input offset (±) (max) (µV)	150
Input offset drift (±) (typ) (µV/°C)	0.2	Voltage gain (V/V)	20, 50, 100, 200
CMRR (min) (dB)	84	Bandwidth (kHz)	105, 150, 210, 350
Supply voltage (max) (V)	5.5	Supply voltage (min) (V)	2.7
Iq (max) (mA)	0.3	Number of channels	1
Comparators (#)	0	Gain error (%)	0.8
Gain error drift (±) (max) (ppm/°C)	20	Slew rate (V/µs)	2
Features	Low-side Capable	Rating	Automotive
TI functional safety category	Functional Safety-Capable	Operating temperature range (°C)	-40 to 125
feature-type	Current Sense Amplifier	feature-number-of-elements-per-chip	2
feature-number-of-channels-per-chip	2	feature-rail-to-rail	Rail to Rail Output
feature-typical-gain-bandwidth-product-mhz		feature-maximum-voltage-gain-db	33.98(Typ)
feature-minimum-cmrr-db	84	feature-minimum-psrr-db	101.94(Typ)
feature-output-type		feature-maximum-input-offset-voltage-mv	0.5@5V
feature-maximum-input-bias-current-ua		feature-maximum-input-resistance-mohm
feature-maximum-power-dissipation-mw		feature-packaging	Tape and Reel
feature-rad-hard		feature-pin-count	5
feature-cecc-qualified	No	feature-esd-protection	Yes
feature-escc-qualified		feature-military	No
feature-aec-qualified	Yes	feature-aec-qualified-number	AEC-Q100
feature-auto-motive	Yes	feature-p-pap	Yes
feature-eccn-code	EAR99	feature-svhc	No
feature-svhc-exceeds-threshold	No