This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

IS25LP016D-JNLE-TR +BOM

FLASH - NOR Memory IC 16Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC

Manufacturer:

ISSI, Integrated Silicon Solution Inc
Mfr.Part #:

IS25LP016D-JNLE-TR
Datasheet:

IS25LP016D-JNLE-TR Datasheet (PDF)
Programmabe:

Verified
Memory Type:

Non-Volatile
Memory Format:

FLASH
Technology:

FLASH - NOR
EDA/CAD Models:

Request Free CAD Models for IS25LP016D-JNLE-TR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

IS25LP016D-JNLE-TR General Description

FLASH - NOR Memory IC 16Mbit SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC

Key Features

Single Power Supply Operation
- Low voltage range: 2.3 V - 3.6 V
Memory Organization
- IS25LQ016: 2048K x 8 (16 Mbit)
Cost Effective Sector/Block Architecture
- 16Mb : Uniform 4KByte sectors / Thirty-two uniform 64KByte blocks
Serial Peripheral Interface (SPI) Compatible
- Supports single-, dual- or quad-output
- Supports SPI Modes 0 and 3
- Maximum 50 MHz clock rate for normal read
- Maximum 104 MHz clock rate for fast read
- Maximum 208MHz clock rate equivalent Dual SPI
- Maximum 400MHz clock rate equivalent Quad SPI
Byte Program Operation
- Typical 10 us/Byte
Page Program (up to 256 Bytes) Operation
- Maximum 0.7ms per page program
Sector, Block or Chip Erase Operation
- Sector Erase (4KB) -> 150ms (Typ)
- Block Erase (64KB) -> 500ms (Typ)
- Chip Erase -> 5s (Typ)
Low Power Consumption
- Max 12 mA active read current
- Max 20 mA program/erase current
- Max 30 uA standby current
Hardware Write Protection
- Protect and unprotect the device from write operation by Write Protect (WP#) Pin
Software Write Protection
- The Block Protect (BP3, BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only
High Product Endurance
- Guaranteed 100,000 program/erase cycles per single sector
- Minimum 20 years data retention
Industrial Standard Pin-out and Package
- 8-pin 208mil SOIC
- 8-contact WSON
- PDIP
- 8-pin 208mil VSOP
- Lead-free (Pb-free) package
Additional 256-byte Security information one-time programmable (OTP) area
Special protect function
- Safe guard function (Appendix 1)
- Sector unlock function (Appendix 2)

Specifications

Programmabe	Verified	Memory Type	Non-Volatile
Memory Format	FLASH	Technology	FLASH - NOR
Memory Size	16Mbit	Memory Organization	2M x 8
Memory Interface	SPI - Quad I/O, QPI, DTR	Clock Frequency	133 MHz
Write Cycle Time - Word, Page	800µs	Access Time	-
Voltage - Supply	2.3V ~ 3.6V	Operating Temperature	-40°C ~ 105°C (TA)
Mounting Type	Surface Mount	Base Product Number	IS25LP016