This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

KSZ8031RNL-TR +BOM

1:1 Data transmission ratio

Manufacturer:

Microchip
Mfr.Part #:

KSZ8031RNL-TR
Datasheet:

KSZ8031RNL-TR Datasheet (PDF)
Mounting Style:

SMD/SMT
Product:

Ethernet Transceivers
Standard:

10BASE-T, 100BASE-TX
Number Of Transceivers:

1 Transceiver
EDA/CAD Models:

Request Free CAD Models for KSZ8031RNL-TR

KSZ8031RNL-TR General Description

Whether you're looking for a reliable Ethernet physical layer transceiver for your industrial project or seeking a compact solution for space-constrained designs, the KSZ8031RNL-TR ticks all the boxes. Its combination of high performance, low power consumption, and versatile features make it a standout choice in the world of networking components. With its robust design and compliance with industry standards, this transceiver is sure to meet the demands of even the most demanding applications

Key Features

Single chip 100BASE-TX/100BASE-FX/10BASE-T physical layer solution
1.8V CMOS design, power consumption 250 mW
Robust (130m+) operation over standard cables
Supports Media Independent Interface (MII), Reduced MII (RMII), and Serial MII (SMII)
LinkMD feature to determine cable length and diagnose faulty cables up 200 m with +/- 2 m accuracy
Supports HP MDI/MDI-X auto crossover
Supports power down mode and power saving mode
MDC/MDIO to 12.5 MHz for rapid configuration
Fully compliant to IEEE 802.3u standard
Supports auto-negotiation and manual selection for 10/100Mbps speed and full / half-duplex mode
Configurable through MII serial management port or via external control pins
Programmable LED outputs for link, activity, full/half duplex, collision and speed
On-chip built-in analog front end filtering for both 100BASE-TX and 10BASE-T
Supports back-to-back, 100BASE-FX to 100BASE-TX for media converter applications
Single 3.3V power supply with built-in 1.8V regulator (‘L’ parts)
48 Pin LQFP, 48 Pin SSOP

Specifications

Product Category	Ethernet ICs	Mounting Style	SMD/SMT
Product	Ethernet Transceivers	Standard	10BASE-T, 100BASE-TX
Number of Transceivers	1 Transceiver	Data Rate	10 Mb/s, 100 Mb/s
Operating Supply Voltage	1.8 V, 2.5 V, 3.3 V	Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 70 C	Moisture Sensitive	Yes
Product Type	Ethernet ICs	Factory Pack Quantity	1000
Subcategory	Communication & Networking ICs	Supply Current - Max	49 mA
Supply Voltage - Max	3.465 V, 2.625 V, 1.89 V	Supply Voltage - Min	3.135 V, 2.375 V, 1.71 V
Part # Aliases	KSZ8031RNL TR	Unit Weight	0.032741 oz
Packaging	[ "Reel" ]	Type	Transceiver
Protocol	RMII	Number of Drivers/Receivers	1/1
Duplex	Full	Voltage - Supply	1.8V, 2.5V, 3.3V
Operating Temperature	0°C ~ 70°C	Mounting Type	Surface Mount
Base Product Number	KSZ8031