This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

KSZ8031RNLI +BOM

IC TXRX ETHERNET 24QFN

Manufacturer:

MICROCHIP
Mfr.Part #:

KSZ8031RNLI
Datasheet:

KSZ8031RNLI Datasheet (PDF)
Type:

Transceiver
Protocol:

RMII
Number Of Drivers/Receivers:

1/1
Duplex:

Full
EDA/CAD Models:

Request Free CAD Models for KSZ8031RNLI

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

KSZ8031RNLI General Description

The KSZ8031RNLI is a versatile and reliable TXRX PHY component designed for use in Ethernet applications. With a data rate of 100Mbps and compatibility with the IEEE 802.3 Ethernet standard, this product offers high-speed connectivity for a variety of networking needs. Operating within a supply voltage range of 3.135V to 3.465V, the KSZ8031RNLI is suitable for a range of power supply setups

Key Features

Single chip 100BASE-TX/100BASE-FX/10BASE-T physical layer solution
1.8V CMOS design, power consumption 250 mW
Robust (130m+) operation over standard cables
Supports Media Independent Interface (MII), Reduced MII (RMII), and Serial MII (SMII)
LinkMD feature to determine cable length and diagnose faulty cables up 200 m with +/- 2 m accuracy
Supports HP MDI/MDI-X auto crossover
Supports power down mode and power saving mode
MDC/MDIO to 12.5 MHz for rapid configuration
Fully compliant to IEEE 802.3u standard
Supports auto-negotiation and manual selection for 10/100Mbps speed and full / half-duplex mode
Configurable through MII serial management port or via external control pins
Programmable LED outputs for link, activity, full/half duplex, collision and speed
On-chip built-in analog front end filtering for both 100BASE-TX and 10BASE-T
Supports back-to-back, 100BASE-FX to 100BASE-TX for media converter applications
Single 3.3V power supply with built-in 1.8V regulator (‘L’ parts)
48 Pin LQFP, 48 Pin SSOP

Specifications

Type	Transceiver	Protocol	RMII
Number of Drivers/Receivers	1/1	Duplex	Full
Receiver Hysteresis	-	Data Rate	-
Voltage - Supply	1.8V, 2.5V, 3.3V	Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount