This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LC75812PTH-8565-H +BOM

Effortlessly drive high-quality visuals with this LCD Display Driver

LCD Driver 100-TQFP (14x14)

Key input function for up to 35 keys (A key scan is performed only when a key is pressed.)
Controls and drives a 5x7 or 5x8 dot matrix LCD.
Supports accessory display segment drive (up to 65 segments)
Display technique: 1/8 duty 1/4 bias drive (5x7 dots)1/9 duty 1/4 bias drive (5x8 dots)
Display digits: 13 digits1 line (5x7 dots), 12 digits1 line (5x8 dots)
Display control memoryCGROM: 240 characters (5x7 or 5x8 dots)CGRAM: 16 characters (5x7 or 5x8 dots)ADRAM: 13x5 bitsDCRAM: 52x8 bits
Instruction function
Sleep mode can be used to reduce current drain.
Built-in display contrast adjustment circuit
Switching between key scan output and general-purpose output ports can be controlled with instructions.
PWM output for adjusting the LED backlight brightness
The frame frequency of the common and segment output waveforms can be controlled by instructions.
Serial data control of switching between the RC oscillator operating mode and external clock operating mode.
Independent LCD driver block power supply VLCD
A voltage detection type reset circuit is provided to initialize the IC and prevent incorrect display.
The INH pin is provided. This pin turns off the display, disables key scanning, and forces the general-purposeoutput ports to the low level.
RC oscillator circuit

Category	Integrated Circuits (ICs)Power Management (PMIC)Display Drivers	Series	-
Display Type	LCD	Configuration	Dot Matrix
Interface	Serial	Digits or Characters	16 Characters, 240 Characters, 12 Digits, 13 Digits
Current - Supply	500 µA	Voltage - Supply	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Surface Mount
Base Product Number	LC75812