Payment Method
LF198H +BOM
Monolithic Sample and Hold Circuit
CAN8-
Manufacturer:
-
Mfr.Part #:
LF198H
-
Datasheet:
-
Rating:
Military
-
Operating Temperature Range (°C):
-55 to 125
-
Feature-minimum-dual-supply-voltage-v:
±5
-
Feature-maximum-dual-supply-voltage-v:
±18
-
EDA/CAD Models:
Availability: 4812 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LF198H General Description
The LFx98x devices are monolithic sample-and-hold circuits that use BI-FET technology to obtain ultrahigh DC accuracy with fast acquisition of signal and low droop rate. Operating as a unity-gain follower, DC gain accuracy is 0.002% typical and acquisition time is as low as 6 µs to 0.01%. A bipolar input stage is used to achieve low offset voltage and wide bandwidth. Input offset adjust is accomplished with a single pin and does not degrade input offset drift. The wide bandwidth allows the LFx98x to be included inside the feedback loop of 1-MHz operational amplifiers without having stability problems. Input impedance of 1010 Ω allows high-source impedances to be used without degrading accuracy.
P-channel junction FETs are combined with bipolar devices in the output amplifier to give droop rates as low as 5 mV/min with a 1-µF hold capacitor. The JFETs have much lower noise than MOS devices used in previous designs and do not exhibit high temperature instabilities. The overall design ensures no feedthrough from input to output in the hold mode, even for input signals equal to the supply voltages.
Logic inputs on the LFx98x are fully differential with low input current, allowing for direct connection to TTL, PMOS, and CMOS. Differential threshold is
1.4 V. The LFx98x will operate from ±5-V to ±18-V supplies.
An A version is available with tightened electrical specifications.
Key Features
- Operates from ±5-V to ±18-V Supplies
- Less than 10-µs Acquisition Time
- Logic Input Compatible With TTL, PMOS, CMOS
- 0.5-mV Typical Hold Step at Ch = 0.01 µF
- Low Input Offset
- 0.002% Gain Accuracy
- Low Output Noise in Hold Mode
- Input Characteristics Do Not Change During Hold Mode
- High Supply Rejection Ratio in Sample or Hold
- Wide Bandwidth
- Space Qualified, JM38510
Specifications
Rating | Military | Operating temperature range (°C) | -55 to 125 |
feature-resolution | feature-maximum-single-supply-voltage-v | ||
feature-minimum-dual-supply-voltage-v | ±5 | feature-maximum-dual-supply-voltage-v | ±18 |
feature-power-supply-type | Dual | feature-packaging | |
feature-minimum-single-supply-voltage-v | feature-rad-hard | ||
feature-pin-count | 8 | feature-cecc-qualified | No |
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 4,812
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $22.498 | $22.50 |
30+ | $21.533 | $645.99 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LF198H, guaranteed quotes back within 12hr.
Power supplies working. Delivery 10 days. Indication.Quality soldering on the four.Voltage 4.99 at allThe quality of the board is also not superRolled off a quarter of bucks.Smarty. sale! 765408 (exclamation mark, change to/)Cm photoWe register on the link, there are no such buns in the direct)In general, i recommend everyone to buy