This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM124N +BOM

Operational Amplifiers - Op Amps Quad 1.3 MHz 100dB 375 uA 20 na 5mV

Manufacturer:

ST
Mfr.Part #:

LM124N
Datasheet:

LM124N Datasheet (PDF)
Part Life Cycle Code:

Obsolete
Pin Count:

14
ECCN Code:

EAR99
HTS Code:

8542.33.00.01
EDA/CAD Models:

Request Free CAD Models for LM124N

LM124N General Description

General Purpose Amplifier 4 Circuit Differential 14-DIP

Key Features

Internally frequency-compensated for unity gain
Large DC voltage gain: 100dB
Wide bandwidth (unity gain): 1MHz (temperature-compensated)
Wide power supply range Single supply: 3VDC to 30VDC or dual
supplies: ±1.5VDC to ±15VDC
Very low supply current drain: essentially independent of supply
voltage (1mW/op amp at +5VDC)
Low input biasing current: 45nADC (temperature-compensated)
Low input offset voltage: 2mVDC and offset current: 5nADC
Differential input voltage range equal to the power supply voltage
Large output voltage: 0VDC to VCC-1.5VDC swing

Specifications

Source Content uid	LM124N	Part Life Cycle Code	Obsolete
Pin Count	14	Reach Compliance Code
ECCN Code	EAR99	HTS Code	8542.33.00.01
Amplifier Type	OPERATIONAL AMPLIFIER	Architecture	VOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)	0.3 µA	Bias Current-Max (IIB) @25C	0.15 µA
Common-mode Reject Ratio-Nom	80 dB	Frequency Compensation	YES
Input Offset Voltage-Max	7000 µV	JESD-30 Code	R-PDIP-T14
JESD-609 Code	e3	Low-Offset	NO
Micropower	YES	Number of Functions	4
Number of Terminals	14	Operating Temperature-Max	125 °C
Operating Temperature-Min	-55 °C	Packing Method	TUBE
Qualification Status	Not Qualified	Seated Height-Max	5.1 mm
Slew Rate-Min	0.2 V/us	Slew Rate-Nom	0.4 V/us
Supply Current-Max	3 mA	Supply Voltage Limit-Max	32 V
Supply Voltage-Nom (Vsup)	5 V	Surface Mount	NO
Technology	BIPOLAR	Temperature Grade	MILITARY
Terminal Finish	MATTE TIN	Terminal Form	THROUGH-HOLE
Terminal Pitch	2.54 mm	Terminal Position	DUAL
Unity Gain BW-Nom	1300	Voltage Gain-Min	25000
Width	7.62 mm	Product Category	Operational Amplifiers - Op Amps
Mounting Style	Through Hole	Number of Channels	4 Channel
Supply Voltage - Max	30 V	GBP - Gain Bandwidth Product	1.3 MHz
Output Current per Channel	40 mA	SR - Slew Rate	400 mV/us
Vos - Input Offset Voltage	5 mV	Supply Voltage - Min	3 V
Minimum Operating Temperature	- 55 C	Maximum Operating Temperature	+ 125 C
Ib - Input Bias Current	150 nA	Operating Supply Current	175 uA
Shutdown	No Shutdown	CMRR - Common Mode Rejection Ratio	70 dB
en - Input Voltage Noise Density	40 nV/sqrt Hz	Series	LM124
Dual Supply Voltage	+/- 3 V, +/- 5 V, +/- 9 V, +/- 12 V	Height	5.1 mm (Max)
Length	20 mm (Max)	Maximum Dual Supply Voltage	15 V
Minimum Dual Supply Voltage	1.5 V	Operating Supply Voltage	3 V to 30 V
Pd - Power Dissipation	500 mW (1/2 W)	Product	Operational Amplifiers
Product Type	Op Amps - Operational Amplifiers	Factory Pack Quantity	25
Subcategory	Amplifier ICs	Supply Type	Single, Dual
Voltage Gain dB	100 dB	Unit Weight	0.057144 oz