Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Frequency-to-voltage converter for ground or supply referred load up to 50-mA (with Zener regulat
DIP14Manufacturer:
Mfr.Part #:
LM2917N/NOPB
Datasheet:
Vs (min) (V):
6
Vs (max) (V):
28
Operating Temperature Range (°C):
-40 to 85
Rating:
Catalog
EDA/CAD Models:
Send all BOMs to
[email protected],
or fill out the form below for a quote on LM2917N/NOPB. Guaranteed response within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
The LM2907 and LM2917 devices are monolithic frequency-to-voltage converters with a high gain op amp designed to operate a relay, lamp, or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low-ripple, full-input protection in two versions (8-pin LM2907 and LM2917), and its output swings to ground for a zero frequency input.
The op amp is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up to 50 mA. The collector may be taken above VCC up to a maximum VCE of 28 V.
The two basic configurations offered include an 8-pin device with a input and an internal connection between the tachometer output and the op amp noninverting input. This version is well suited for single speed or frequency switching or fully buffered frequency-to-voltage conversion applications.
The more versatile configurations provide differential tachometer input and uncommitted op amp inputs. With this version the tachometer input may be floated and the op amp becomes suitable for active filter conditioning of the tachometer output.
Both of these configurations are available with an active shunt regulator connected across the power leads. The regulator clamps the supply such that stable frequency-to-voltage and frequency-to-current operations are possible with any supply voltage and a suitable resistor.
Vs (min) (V) | 6 | Vs (max) (V) | 28 |
Product type | Frequency-to-voltage | Operating temperature range (°C) | -40 to 85 |
Rating | Catalog | feature-resolution | |
feature-minimum-single-supply-voltage-v | feature-power-supply-type | Single | |
feature-minimum-dual-supply-voltage-v | feature-maximum-dual-supply-voltage-v | ||
feature-packaging | Tube | feature-maximum-single-supply-voltage-v | 28 |
feature-rad-hard | feature-pin-count | 14 | |
feature-cecc-qualified | No | feature-esd-protection | |
feature-escc-qualified | feature-military | No | |
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-eccn-code | EAR99 | feature-svhc | No |
feature-svhc-exceeds-threshold | No |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $1.479 | $1.48 |
10+ | $1.445 | $14.45 |
30+ | $1.424 | $42.72 |
100+ | $1.403 | $140.30 |
The prices below are for reference only.
ADS1115IDGST
Texas Instruments
1000+ $1.850
ADS1115IDGSR
Texas Instruments
1000+ $1.131
PCM2704
TI
98dB SNR Stereo USB2.0 FS DAC with line-out and S/PDIF output, Bus/Self-powered (Ext. ROM Interface)
ADS1258
TI
24-bit, 125kSPS, 16-ch delta-sigma ADC with fast channel scan and automatic sequencer
PCM56P
Texas Instruments
16-bit depth, 16-pin DIP package for seamless integration
Impressed with the quality and authenticity of the NH82801HB components received from Avaq. The smooth transaction and rapid delivery make them my go-to distributor. Highly satisfied!