This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

LM4871 SOIC (D)-8,VSSOP (DGK)-8,WSON (NGN)-8

Images are for reference only,

See Technical Specifications

LM4871 +BOM

3-W, mono, analog input Class-AB audio amplifier

Manufacturer:

HLF
Mfr.Part #:

LM4871
Datasheet:

LM4871 Datasheet (PDF)
Audio Input Type:

Analog Input
Architecture:

Class-AB
Speaker Channels (max):

Mono
Rating:

Catalog
EDA/CAD Models:

Request Free CAD Models for LM4871

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM4871 General Description

The LM4871 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3Ω load with less than 10% THD when powered by a 5V power supply (see Note). To conserve power in portable applications, the LM4871's micropower shutdown mode (I_Q = 0.6µA, typ) is activated when V_DD is applied to the SHUTDOWN pin.

Boomer audio power amplifiers are designed specifically to provide high power, high fidelity audio output. They require few external components and operate on low supply voltages from 2.0V to 5.5V. Since the LM4871 does not require output coupling capacitors, bootstrap capacitors, or snubber networks, it is ideally suited for low-power portable systems that require minimum volume and weight.

Additional LM4871 features include thermal shutdown protection, unity-gain stability, and external gain set.

Note: An LM4871LD that has been properly mounted to a circuit board will deliver 3W into 3Ω (at 10% THD). The other package options for the LM4871 will deliver 1.5W into 8Ω (at 10% THD). See the section for further information concerning the LM4871LD, LM4871MM, LM4871M, and the LM4871N.

Key Features

No Output Coupling Capacitors, Bootstrap Capacitors, or Snubber Circuits Required
Unity-gain Stable
WSON, VSSOP, SOIC, or PDIP Packaging
External Gain Configuration Capability
Pin Compatible with the LM4861

Key Specifications

PO at 10% THD+N, 1kHz
- LM4871LD: 3Ω , 4Ω Loads; 3W (typ),
  2.5 W (typ)
- All other LM4871 Packages: 8Ω load
  1.5 W (typ)
Shutdown Current 0.6µA (typ)
Supply Voltage Range 2.0V to 5.5 V
THD at 1kHz at 1W Continuous Average Output Power into 8Ω 0.5% (max)

All trademarks are the property of their respective owners.

Specifications

Audio input type	Analog Input	Architecture	Class-AB
Speaker channels (max)	Mono	Rating	Catalog
Power stage supply (max) (V)	5.5	Power stage supply (min) (V)	2
Load (min) (Ω)	3	Output power (W)	3
THD + N at 1 kHz (%)	0.13	Iq (typ) (mA)	6.5
Control interface	Hardware	Closed/open loop	Closed
Analog supply (min) (V)	2	Analog supply voltage (max) (V)	5.5
PSRR (dB)	60	Operating temperature range (°C)	-40 to 85