Payment Method
LM4950TSX/NOPB +BOM
3.1-W, mono, 9.6- to 16-V, analog input Class-AB audio amplifier
TO263-
Manufacturer:
-
Mfr.Part #:
LM4950TSX/NOPB
-
Datasheet:
-
Series:
Boomer®
-
Type:
Class AB
-
Output Type:
1-Channel (Mono) or 2-Channel (Stereo)
-
Max Output Power X Channels @ Load:
7.5W x 1 @ 8Ohm; 3.1W x 2 @ 4Ohm
-
EDA/CAD Models:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LM4950TSX/NOPB, guaranteed quotes back within 12hr.
Availability: 5213 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LM4950TSX/NOPB General Description
The LM4950 is a dual audio power amplifier primarily designed for demanding applications in flat panel monitors and TV's. It is capable of delivering 3.1 watts per channel to a 4Ω single-ended load with less than 1% THD+N or 7.5 watts mono BTL to an 8Ω load, with less than 10% THD+N from a 12VDC power supply.
Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4950 does not require bootstrap capacitors or snubber circuits. Therefore, it is ideally suited for display applications requiring high power and minimal size.
The LM4950 features a low-power consumption active-low shutdown mode. Additionally, the LM4950 features an internal thermal shutdown protection mechanism along with short circuit protection.
The LM4950 contains advanced pop & click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions.
The LM4950 is a unity-gain stable and can be configured by external gain-setting resistors.
Key Features
- Pop & Click Circuitry Eliminates Noise During Turn-On and Turn-Off Transitions
- Low Current, Active-Low Shutdown Mode
- Low Quiescent Current
- Stereo 3.1W Output, RL = 4Ω
- Mono 7.5W BTL Output, RL = 8Ω
- Short Circuit Protection
- Unity-Gain Stable
- External Gain Configuration Capability
- Quiescent Power Supply Current 16mA (typ)
- POUT (SE)
- VDD = 12V, RL = 4Ω, 1% THD+N: 3.1W (typ)
- POUT (BTL)
- VDD = 12V, RL = 8Ω, 10% THD+N: 7.5W (typ)
- Shutdown Current 40μA (typ)
All trademarks are the property of their respective owners.
Specifications
Category | Integrated Circuits (ICs)LinearAmplifiersAudio Amplifiers | Series | Boomer® |
Type | Class AB | Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
Max Output Power x Channels @ Load | 7.5W x 1 @ 8Ohm; 3.1W x 2 @ 4Ohm | Voltage - Supply | 9.6V ~ 16V |
Features | Depop, Short-Circuit and Thermal Protection, Shutdown | Mounting Type | Surface Mount |
Operating Temperature | -40°C ~ 85°C (TA) | Base Product Number | LM4950 |
Audio input type | Analog Input | Architecture | Class-AB |
Speaker channels (max) | Stereo | Rating | Catalog |
Power stage supply (max) (V) | 16 | Power stage supply (min) (V) | 9.6 |
Load (min) (Ω) | 4 | Output power (W) | 7.5 |
THD + N at 1 kHz (%) | 0.03 | Iq (typ) (mA) | 16 |
Control interface | Hardware | Closed/open loop | Open |
Analog supply (min) (V) | 9.6 | Analog supply voltage (max) (V) | 16 |
PSRR (dB) | 70 | Operating temperature range (°C) | -40 to 85 |
feature-function | Speaker | feature-amplifier-type | Class-AB |
feature-rail-to-rail | feature-typical-gain-bandwidth-product-mhz | ||
feature-typical-psrr-db | 70 | feature-total-harmonic-distortion-noise | 0.05%@[email protected] |
feature-input-signal-type | Single | feature-output-signal-type | Single|Differential |
feature-output-type | 1-Channel Mono|2-Channel Stereo | feature-maximum-output-current-ma | 5000(Typ) |
feature-maximum-input-offset-voltage-mv | 30 | feature-maximum-input-bias-current-ua | |
feature-maximum-power-dissipation-mw | feature-packaging | Tape and Reel | |
feature-rad-hard | feature-pin-count | 10 | |
feature-cecc-qualified | No | feature-esd-protection | Yes |
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | Yes | feature-svhc-exceeds-threshold | Yes |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 5,213
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
Excellent capacitors, used 5 pieces of 20 all working