Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
4.5-75V Wide Vin, Constant On-Time Non-Synchronous PFET Buck Controller
MSOP8Manufacturer:
Mfr.Part #:
LM5085MY/NOPB
Datasheet:
Vin (min) (V):
4.5
Vin (max) (V):
75
Vout (min) (V):
1.25
Vout (max) (V):
75
EDA/CAD Models:
Please fill in the short form below and we will provide you the quotation immediately.
The LM5085MY/NOPB's ability to handle input voltages from 4.5V to 75V make it a versatile choice for a variety of power management applications. Its programmable peak current limit and wide switching frequency range offer flexibility and optimization, while the integrated gate drivers and precision reference voltage ensure efficient and accurate power management. The compact 10-pin VSSOP package makes it ideal for space-constrained designs, and the inclusion of overvoltage protection and thermal shutdown features enhances system reliability in demanding environments
Vin (min) (V) | 4.5 | Vin (max) (V) | 75 |
Vout (min) (V) | 1.25 | Vout (max) (V) | 75 |
Iout (max) (A) | 10 | Iq (typ) (mA) | 1.3 |
Switching frequency (min) (kHz) | 50 | Switching frequency (max) (kHz) | 1000 |
Features | Adjustable current limit, Enable, Frequency synchronization | Operating temperature range (°C) | -40 to 125 |
Regulated outputs (#) | 1 | Number of phases | 1 |
Rating | Catalog | Control mode | Constant on-time (COT) |
Type | Controller | feature-topology | Step Down |
feature-number-of-outputs | 1 | feature-output-voltage-v | 1.25 to 75 |
feature-minimum-output-current-a | feature-maximum-output-current-a | 10 | |
feature-minimum-input-voltage-v | 4.5 | feature-maximum-switching-frequency-khz | 1000 |
feature-maximum-input-voltage-v | 75 | feature-operating-supply-voltage-v | 4.5 to 75 |
feature-maximum-supply-current-ma | 1.3(Typ) | feature-maximum-power-dissipation-mw | |
feature-minimum-switching-frequency-khz | feature-synchronous-rectifier | ||
feature-synchronous-clock | feature-packaging | Tape and Reel | |
feature-rad-hard | feature-pin-count | 8 | |
feature-cecc-qualified | No | feature-esd-protection | Yes |
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-eccn-code | EAR99 | |
feature-svhc | No | feature-svhc-exceeds-threshold | No |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for LM5085MY/NOPB, guaranteed quotes back within
12hr.
Each board is packed in an antistatic bag. That's where all the joys end. Resistors-terminators at 120 ohms are soldered, but not connected. To connect, you need to solder a long enough jumper. Could on the board make two nearby standing contact areas for easy connection of resistors. Next, the most interesting: the inputs max490 from the uart side are connected leds through resistors. Just so, directly, without transistors. So i could not understand for a short time why there is no data transmission, although the led blinked. It turned out that the signal from the microcontroller on the tx line was planted with a led and not perceived max490, so i had to remove the resistor connecting the led. After that, everything worked fine.