This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM741CN +BOM

Operational Amplifier General Purpose 1 Circuit

Manufacturer:

Texas Instruments
Mfr.Part #:

LM741CN
Datasheet:

LM741CN Datasheet (PDF)
Mounting Style:

Through Hole
Number of Channels:

1 Channel
Supply Voltage - Max:

44 V, +/- 18 V
GBP - Gain Bandwidth Product:

1 MHz
EDA/CAD Models:

Request Free CAD Models for LM741CN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM741CN General Description

The LM741CN is a general-purpose operational amplifier (op-amp) that is widely used in various electronic circuits due to its high performance and reliability. It is a single operational amplifier with a unity-gain bandwidth of 1 MHz, slew rate of 0.5V/µs, and a typicl input offset voltage of 2 mV. It is designed to operate from a single power supply or a dual power supply with a voltage range of ±3V to ±18V.The LM741CN has a high open-loop gain of 100 dB, ensuring accurate and stable amplification of input signals. It also has a high input impedance of 2 MΩ, allowing it to interface easily with external devices without loading the input signal.The op-amp comes in an 8-pin PDIP package, making it easy to integrate into various circuit designs. It is also available in different temperature ranges, making it suitable for a wide range of applications in both commercial and industrial sectors.

Key Features

Single operational amplifier
Wide supply voltage range: ±3V to ±22V
Low input offset voltage: 2mV max
Low input bias current: 80nA max
High slew rate: 0.5V/µs typical
Operating temperature range: 0°C to 70°C

Application

Audio amplifier circuits
Instrumentation amplifier circuits
Signal processing circuits
Active filters
Current-to-voltage converters
Low-frequency oscillators
Waveform generators
Comparators
Instrumentation devices
Sensor signal conditioning circuits

Specifications

Product Category	Operational Amplifiers - Op Amps	Mounting Style	Through Hole
Number of Channels	1 Channel	Supply Voltage - Max	44 V, +/- 18 V
GBP - Gain Bandwidth Product	1 MHz	Output Current per Channel	25 mA
SR - Slew Rate	500 mV/us	Vos - Input Offset Voltage	6 mV
Supply Voltage - Min	10 V, +/- 5 V	Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 70 C	Ib - Input Bias Current	500 nA
Operating Supply Current	2.8 mA	Shutdown	No Shutdown
CMRR - Common Mode Rejection Ratio	70 dB	en - Input Voltage Noise Density	30 nV/sqrt Hz
Series	LM741	Dual Supply Voltage	+/- 9 V, +/- 12 V, +/- 15 V
Height	3.3 mm	Length	9.27 mm
Maximum Dual Supply Voltage	+/- 18 V	Minimum Dual Supply Voltage	+/- 5 V
Operating Supply Voltage	10 V to 44 V	Pd - Power Dissipation	500 mW (1/2 W)
Product	Operational Amplifiers	Product Type	Op Amps - Operational Amplifiers
Factory Pack Quantity	40	Subcategory	Amplifier ICs
Supply Type	Dual	Technology	Bipolar
Voltage Gain dB	106.02 dB	Width	6.35 mm
Unit Weight	0.026879 oz