This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LMH6639MF/NOPB +BOM

190MHz Rail-to-Rail Output Amplifier with Disable

Manufacturer:

TI
Mfr.Part #:

LMH6639MF/NOPB
Datasheet:

LMH6639MF/NOPB Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

6
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for LMH6639MF/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LMH6639MF/NOPB General Description

The LMH6639 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 110mA. Employing TI’s patented VIP10 process, the LMH6639 delivers a bandwidth of 190MHz at a current consumption of only 3.6mA. An input common mode voltage range extending to 0.2V below the V⁻ and to within 1V of V⁺, makes the LMH6639 a true single supply op-amp. The output voltage range extends to within 30mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications.

The LMH6639 offers a slew rate of 172V/μs resulting in a full power bandwidth of approximately 28MHz. The LMH6639 also offers protection for the input transistors by using two anti-parallel diodes and a series resistor connected across the inputs. The T_ON value of 83nsec combined with a settling time of 33nsec makes this device ideally suited for multiplexing applications (see application note for details). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including harmonic distortion of −60dBc, differential gain of 0.12% and differential phase of 0.045°

Key Features

(V_S = 5V, Typical Values Unless Specified)
Supply Current (No Load) 3.6mA
Supply Current (Off Mode) 400μA
Output Resistance (Closed Loop 1MHz) 0.186Ω
−3dB BW (A_V = 1) 190MHz
Settling Time 33nsec
Input Common Mode Voltage −0.2V to 4V
Output Voltage Swing 40mV from Rails
Linear Output Current 110mA
Total Harmonic Distortion −60dBc
Fully Characterized for 3V, 5V and ±5V
No Output Phase Reversal with CMVR Exceeded
Excellent Overdrive Recovery
Off Isolation 1MHz −70dB
Differential Gain 0.12%
Differential Phase 0.045°

All trademarks are the property of their respective owners.

Specifications

Source Content uid	LMH6639MF/NOPB	Pbfree Code	Yes
Part Life Cycle Code	Active	Pin Count	6
Reach Compliance Code	compliant	ECCN Code	EAR99
HTS Code	8542.33.00.01	Amplifier Type	OPERATIONAL AMPLIFIER
Architecture	VOLTAGE-FEEDBACK	Average Bias Current-Max (IIB)	3.25 µA
Bandwidth (3dB)-Nom	63 MHz	Bias Current-Max (IIB) @25C	2.6 µA
Common-mode Reject Ratio-Min	72 dB	Common-mode Reject Ratio-Nom	95 dB
Frequency Compensation	YES	Input Offset Current-Max (IIO)	0.8 µA
Input Offset Voltage-Max	5000 µV	JESD-30 Code	R-PDSO-G6
JESD-609 Code	e3	Length	2.92 mm
Low-Bias	NO	Low-Offset	NO
Micropower	NO	Moisture Sensitivity Level	1
Neg Supply Voltage Limit-Max	-6.3 V	Neg Supply Voltage-Nom (Vsup)	-5 V
Number of Functions	1	Number of Terminals	6
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
Packing Method	TR	Peak Reflow Temperature (Cel)	260
Power	NO	Programmable Power	NO
Qualification Status	Not Qualified	Seated Height-Max	1.22 mm
Slew Rate-Min	120 V/us	Slew Rate-Nom	200 V/us
Supply Current-Max	5.8 mA	Supply Voltage Limit-Max	6.3 V
Supply Voltage-Nom (Vsup)	5 V	Surface Mount	YES
Technology	BIPOLAR	Temperature Grade	INDUSTRIAL
Terminal Finish	MATTE TIN	Terminal Form	GULL WING
Terminal Pitch	0.95 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30	Unity Gain BW-Nom	228000
Voltage Gain-Min	5011.872	Wideband	YES
Width	1.6 mm