This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LMH6646MA +BOM

amp with maximum offset of 4000uV

Manufacturer:

Texas Instruments
Mfr.Part #:

LMH6646MA
Datasheet:

LMH6646MA Datasheet (PDF)
Mounting Style:

SMD/SMT
Number Of Channels:

2 Channel
Supply Voltage - Max:

12 V, +/- 6 V
GBP - Gain Bandwidth Product:

55 MHz
EDA/CAD Models:

Request Free CAD Models for LMH6646MA

LMH6646MA General Description

This operational amplifier operates on a single supply voltage ranging from 2.7V to 12V, consuming a mere 3.8 mA of supply current. Its high output current of ±150 mA and a wide output voltage swing of ±12 V further enhance its versatility, allowing it to handle a diverse range of signal processing requirements with ease. With a low total harmonic distortion of -69 dBc at 1 MHz, the LMH6646MA guarantees high-quality output, particularly in precision audio and data acquisition applications

Key Features

VS = ±5V, TA = 25°C, RF = 1 kΩ, RG = 100Ω, RL = 100Ω,
AV = AVMAX = 9.4 V/V, Typical values unless specified.
−3 dB BW 150 MHz
Gain control BW 100 MHz
Adjustment range (<10 MHz) 80 dB
Gain matching (limit) ±0.50 dB
Supply voltage range 7V to 12V
Slew rate (inverting) 1500 V/μs
Supply current (no load) 11 mA
Linear output current ±60 mA
Output voltage swing ±2.4V
Input noise voltage 4.4 nV/√Hz
Input noise current 2.6 pA/√Hz
THD (20 MHz, RL = 100Ω, VO = 2 VPP) −45 dBc

Specifications

Product Category	Operational Amplifiers - Op Amps	Mounting Style	SMD/SMT
Number of Channels	2 Channel	Supply Voltage - Max	12 V, +/- 6 V
GBP - Gain Bandwidth Product	55 MHz	Output Current per Channel	20 mA
SR - Slew Rate	22 V/us	Vos - Input Offset Voltage	3 mV
Supply Voltage - Min	2.5 V, +/- 1.25 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Ib - Input Bias Current	2 uA
Operating Supply Current	2.8 mA	Shutdown	Shutdown
CMRR - Common Mode Rejection Ratio	58 dB	en - Input Voltage Noise Density	25 nV/sqrt Hz
Series	LMH6646	Dual Supply Voltage	+/- 3 V, +/- 5 V
Height	1.45 mm	In - Input Noise Current Density	1.2 pA/sqrt Hz
Length	4.9 mm	Maximum Dual Supply Voltage	+/- 6 V
Minimum Dual Supply Voltage	+/- 1.25 V	Operating Supply Voltage	3 V, 5 V, 9 V
Product	Operational Amplifiers	Product Type	Op Amps - Operational Amplifiers
PSRR - Power Supply Rejection Ratio	75 dB	Factory Pack Quantity	95
Subcategory	Amplifier ICs	Supply Type	Single, Dual
Technology	BiCOM	Voltage Gain dB	85 dB
Width	3.9 mm	Unit Weight	0.006596 oz