This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LP8869QPWPRQ1 +BOM

LED Driver IC 3 Output DC DC Regulator SEPIC, Step-Up (Boost) PWM Dimming 120mA 20-HTSSOP

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

LP8869QPWPRQ1
Datasheet:

LP8869QPWPRQ1 Datasheet (PDF)
Series:

Automotive, AEC-Q100
Type:

DC DC Regulator
Topology:

SEPIC, Step-Up (Boost)
Internal Switch(s):

Yes
EDA/CAD Models:

Request Free CAD Models for LP8869QPWPRQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LP8869QPWPRQ1 General Description

The LP8867-Q1, LP8869-Q1 is an automotive highly-integrated, low-EMI, easy-to-use LED driver with DC-DC converter. The DC-DC converter supports both boost and SEPIC mode operation. The device has four or three high-precision current sinks that can be combined for higher current capability.

The DC-DC converter has adaptive output voltage control based on the LED forward voltages. This feature minimizes the power consumption by adjusting the voltage to the lowest sufficient level in all conditions. For EMI reduction DC-DC supports spread spectrum for switching frequency and an external synchronization with dedicated pin. A wide-range adjustable frequency allows the LP886x-Q1 to avoid disturbance for sensitive frequency band.

The input voltage range for the LP886x-Q1 is from 4.5 V to 40 V to support automotive start-stop and load dump condition. The LP886x-Q1 integrates extensive fault detection features.

Key Features

AEC-Q100 Qualified for automotive applications:
- Device temperature grade 1:
  –40°C to +125°C, T_A
Functional safety capable
- Documentation available to aid functional safety system design
3-, 4-Channel 120-mA current sinks
- High dimming ratio of 10 000:1 at 100 Hz
- Current matching 1% (typical)
- LED String current up to 120 mA per channel
- Outputs can be combined externally for higher current per string
Integrated boost and SEPIC converter for LED string power
- Input voltage operating range 4.5 V to 40 V
- Output voltage up to 45 V
- Integrated 3.3-A Switch FET
- Switching frequency 300 kHz to 2.2 MHz
- Switching synchronization input
- Spread spectrum for lower EMI
Fault detection and protection
- Fault output
- Input voltage OVP, UVLO and OCP
- Boost block SW OVP and output OVP
- LED open and short fault detection
- Power-Line FET control for battery bus protection
- Automatic LED current reduction with external temperature sensor
- Thermal shutdown

Application

– Automotive infotainment
– Automotive instrument clusters
– Smart mirrors
– Heads-up displays (HUD)

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)LED Drivers	Series	Automotive, AEC-Q100
Type	DC DC Regulator	Topology	SEPIC, Step-Up (Boost)
Internal Switch(s)	Yes	Number of Outputs	3
Voltage - Supply (Min)	4.5V	Voltage - Supply (Max)	45V
Voltage - Output	6V ~ 45V	Current - Output / Channel	120mA
Frequency	300kHz ~ 2.2MHz	Dimming	PWM
Applications	Automotive, Backlight	Operating Temperature	-40°C ~ 125°C (TA)
Mounting Type	Surface Mount	Base Product Number	LP8869