This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LPC1112 +BOM

Cortex-M0basedmicrocontrollerswithindustry-leadingpowerandefficiency

Manufacturer:

NXP
Mfr.Part #:

LPC1112
Datasheet:

LPC1112 Datasheet (PDF)
Package/Case:

LQFP48
RoHS:
EDA/CAD Models:

Request Free CAD Models for LPC1112

LPC1112 General Description

Cortex-M0 based microcontrollers with industry-leading power and efficiencyBuilt around the new Cortex-M0 architecture, the smallest, lowest power, and most energy-efficient ARM core ever developed, these MCUs are ideally equipped for use in many traditional 8/16-bit applications.Key features► ARM Cortex-M0 processor - 50 MHz operation - Nested Vectored Interrupt Controller for fast deterministic interrupts - Wakeup Interrupt Controller allows automatic wake from a priority interrupt - Three reduced-power modes: Sleep, Deep-sleep, and Deep power-down► Memories - Up to 128 KB Flash memory - Up to 16 KB SRAM► Serial peripherals - UART with fractional baud rate generation, internal FIFO, and RS-485 support - Up to 2 SPI controllers with FIFO and multi-protocol capabilities - I2C-bus interface supporting full I2C-bus specification and Fast mode plus with a data rate of 1 Mbit/s with multiple address recognition and monitor mode► Analogperipheral - 10-bit Analog-to-Digital Converter with eight channels and conversion rates up to 400 K samples per second► Other: - Up to 42 general-purpose I/O (GPIO) pins with configurable pull-up/down resistors and a new, configurable open-drain operating mode - Four general-purpose counter/timers, with a total of four capture inputs and 13 match outputs - Programmable Watchdog Timer (WDT) with lock-out feature - System tick timer - Each peripheral has its own clock divider for power savingsApplications► White goods► e-Metering► Consumer peripherals► Remote sensors► 8/16-bit applications► Industrial networking► System supervisors

Key Features

► ARM Cortex-M0 processor
- 50 MHz operation
- Nested Vectored Interrupt Controller for fast deterministic interrupts
- Wakeup Interrupt Controller allows automatic wake from a priority interrupt
- Three reduced-power modes: Sleep, Deep-sleep, and Deep power-down
► Memories
- Up to 128 KB Flash memory
- Up to 16 KB SRAM
► Serial peripherals
- UART with fractional baud rate generation, internal FIFO, and RS-485 support
- Up to 2 SPI controllers with FIFO and multi-protocol capabilities
- I2C-bus interface supporting full I2C-bus specification and Fast mode plus with a data rate of 1 Mbit/s with multiple address recognition and monitor mode
► Analogperipheral
- 10-bit Analog-to-Digital Converter with eight channels and conversion rates up to 400 K samples per second
► Other:
- Up to 42 general-purpose I/O (GPIO) pins with configurable pull-up/down resistors and a new, configurable open-drain operating mode
- Four general-purpose counter/timers, with a total of four capture inputs and 13 match outputs
- Programmable Watchdog Timer (WDT) with lock-out feature
- System tick timer
- Each peripheral has its own clock divider for power savings