This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MAX5864ETM-T +BOM

Codec General Purpose 1-CH 8bit/10bit 2.5V/3V 48-Pin TQFN EP T/R

Manufacturer:

Maxim Integrated
Mfr.Part #:

MAX5864ETM-T
Datasheet:

MAX5864ETM-T Datasheet (PDF)
Series:

MAX5864
Type:

Low Power AFE
Packaging:

Reel
Factory Pack Quantity:

2500
EDA/CAD Models:

Request Free CAD Models for MAX5864ETM-T

MAX5864ETM-T General Description

The MAX5864 ultra-low-power, highly integrated analog front end is ideal for portable communication equipment such as handsets, PDAs, WLAN, and 3G wireless terminals. The MAX5864 integrates dual 8-bit receive ADCs and dual 10-bit transmit DACs while providing the highest dynamic performance at ultra-low power. The ADCs' analog I-Q input amplifiers are fully differential and accept 1VP-P full-scale signals. Typical I-Q channel phase matching is ±0.1° and amplitude matching is ±0.03dB. The ADCs feature 48.5dB SINAD and 69dBc spurious-free dynamic range (SFDR) at fIN = 5.5MHz and fCLK = 22Msps. The DACs' analog I-Q outputs are fully differential with ±400mV full-scale output, and 1.4V common-mode level. Typical I-Q channel phase match is ±0.15° and amplitude match is ±0.05dB. The DACs also feature dual 10-bit resolution with 71.7dBc SFDR, and 57dB SNR at fOUT = 2.2MHz and fCLK = 22MHz. The ADCs and DACs operate simultaneously or independently for frequency-division duplex (FDD) and time-division duplex (TDD) modes. A 3-wire serial interface controls power-down and transceiver modes of operation. The typical operating power is 42mW at fCLK = 22Msps with the ADCs and DACs operating simultaneously in transceiver mode. The MAX5864 features an internal 1.024V voltage reference that is stable over the entire operating power-supply range and temperature range. The MAX5864 operates on a +2.7V to +3.3V analog power supply and a +1.8V to +3.3V digital I/O power supply for logic compatibility. The quiescent current is 5.6mA in idle mode and 1μA in shutdown mode. The MAX5864 is specified for the extended (-40°C to +85°C) temperature range and is available in a 48-pin thin QFN package.See a parametric table of the complete family of pin-compatible AFEs.

Key Features

CLK
CLK
IN
OUT
IN
MAX5865EVKIT

Application

3G Wireless Terminals
Fixed/Mobile Broadband Wireless Modems
Narrowband/Wideband CDMA Handsets
PDAs

Specifications

Product Category:	Analog Front End - AFE	Series:	MAX5864
Type:	Low Power AFE	Packaging:	Reel
Product Type:	Analog Front End - AFE	Factory Pack Quantity:	2500
Subcategory:	Data Converter ICs	Part # Aliases:	MAX5864