This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MB90F598 +BOM

16-bitProprietaryMicrocontroller

Manufacturer:

Fujitsu
Mfr.Part #:

MB90F598
Datasheet:

MB90F598 Datasheet (PDF)
Series:

F2MC-8FX
Core Processor:

8FX
Core Size:

8-Bit
Speed:

20MHz

MB90F598 General Description

■ DESCRIPTIONThe MB90595/595G series with FULL-CAN*1 interface and FLASH ROM is especially designed for automotive and industrial applications. Its main features are two on board CAN Interfaces, which conform to V2.0 Part A and Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN approach.■ FEATURES• Clock Embedded PLL clock multiplication circuit Operating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation (at oscillation of 4 MHz, 4 MHz to 16 MHz). Minimum instruction execution time: 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock, VCC of 5.0 V)• Instruction set to optimize controller applications Rich data types (bit, byte, word, long word) Rich addressing mode (23 types) Enhanced signed multiplication/division instruction and RETI instruction functions Enhanced precision calculation realized by the 32-bit accumulator• Instruction set designed for high level language (C language) and multi-task operations Adoption of system stack pointer Enhanced pointer indirect instructions Barrel shift instructions• Program patch function (for two address pointers)• Enhanced execution speed: 4-byte instruction queue• Enhanced interrupt function: 8 levels, 34 factors• Automatic data transmission function independent of CPU operation Extended intelligent I/O service function (EI2OS): Up to 10 channels• Embedded ROM size and types Mask ROM: 128 Kbytes Flash ROM: 128 Kbytes Embedded RAM size: 4 Kbytes (MB90V595/595G: 6 Kbytes)• Flash ROM Supports automatic programming, Embedded Algorithm TM* Write/Erase/Erase-Suspend/Resume commands A flag indicating completion of the algorithm Hard-wired reset vector available in order to point to a fixed boot sector Erase can be performed on each block Block protection with external programming voltage• Low-power consumption (stand-by) mode Sleep mode (mode in which CPU operating clock is stopped) Stop mode (mode in which oscillation is stopped) CPU intermittent operation mode Hardware stand-by mode• Process: 0.5 µm CMOS technology• I/O port General-purpose I/O ports: 78 ports Push-pull output and Schmitt trigger input. Programmable on each bit as I/O or signal for peripherals.• Timer Watchdog timer: 1 channel 8/16-bit PPG timer: 8/16-bit × 6 channels 16-bit re-load timer: 2 channels• 16-bit I/O timer Input capture: 4 channels Output compare: 4 channels• Extended I/O serial interface: 1 channel• UART0 With full-duplex double buffer (8-bit length) Clock asynchronized or clock synchronized (with start/stop bit) transmission can be selectively used.• UART1 (SCI) With full-duplex double buffer (8-bit length) Clock asynchronized or clock synchronized serial transmission (I/O extended transmission) can be selectively used.• Stepping motor controller (4 channels)• External interrupt circuit (8 channels) A module for starting an extended intelligent I/O service (EI2OS) and generating an external interrupt which is triggered by an external input.• Delayed interrupt generation module: Generates an interrupt request for switching tasks.• 8/10-bit A/D converter (8 channels) 8/10-bit resolution can be selectively used. Starting by an external trigger input.• FULL-CAN interface: 1 channel Conforming to Version 2.0 Part A and Part B Flexible message buffering (mailbox and FIFO buffering can be mixed)• 18-bit Time-base counter• External bus interface: Maximum address space 16 Mbytes

Key Features

Clock
Embedded PLL clock multiplication circuit
Operating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation (at oscillation of 4 MHz, 4 MHz to 16 MHz).
Minimum instruction execution time: 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock, VCC of 5.0 V)
Instruction set to optimize controller applications
Rich data types (bit, byte, word, long word)
Rich addressing mode (23 types)
Enhanced signed multiplication/division instruction and RETI instruction functions
Enhanced precision calculation realized by the 32-bit accumulator
Instruction set designed for high level language (C language) and multi-task operations
Adoption of system stack pointer
Enhanced pointer indirect instructions
Barrel shift instructions
Program patch function (for two address pointers)
Enhanced execution speed: 4-byte instruction queue
Enhanced interrupt function: 8 levels, 34 factors
Automatic data transmission function independent of CPU operation
Extended intelligent I/O service function (EI2OS): Up to 10 channels
Embedded ROM size and types
Mask ROM: 128 Kbytes
Flash ROM: 128 Kbytes
Embedded RAM size: 4 Kbytes (MB90V595/595G: 6 Kbytes)
Flash ROM
Supports automatic programming, Embedded Algorithm TM
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Hard-wired reset vector available in order to point to a fixed boot sector
Erase can be performed on each block
Block protection with external programming voltage
Low-power consumption (stand-by) mode
Sleep mode (mode in which CPU operating clock is stopped)
Stop mode (mode in which oscillation is stopped)
CPU intermittent operation mode
Hardware stand-by mode
Process: 0.5 µm CMOS technology
I/O port
General-purpose I/O ports: 78 ports
Push-pull output and Schmitt trigger input.
Programmable on each bit as I/O or signal for peripherals.
Timer
Watchdog timer: 1 channel
8/16-bit PPG timer: 8/16-bit × 6 channels
16-bit re-load timer: 2 channels
16-bit I/O timer
Input capture: 4 channels
Output compare: 4 channels
Extended I/O serial interface: 1 channel
UART0
With full-duplex double buffer (8-bit length)
Clock asynchronized or clock synchronized (with start/stop bit) transmission can be selectively used.
UART1 (SCI)
With full-duplex double buffer (8-bit length)
Clock asynchronized or clock synchronized serial transmission (I/O extended transmission) can be selectively used.
Stepping motor controller (4 channels)
External interrupt circuit (8 channels)
A module for starting an extended intelligent I/O service (EI2OS) and generating an external interrupt which is triggered by an external input.
Delayed interrupt generation module: Generates an interrupt request for switching tasks.
8/10-bit A/D converter (8 channels)
8/10-bit resolution can be selectively used.
Starting by an external trigger input.
FULL-CAN interface: 1 channel
Conforming to Version 2.0 Part A and Part B
Flexible message buffering (mailbox and FIFO buffering can be mixed)
18-bit Time-base counter
External bus interface: Maximum address space 16 Mbytes

Application

The MB90F598 microcontroller can be used in a variety of applications, including:
1. Industrial control systems: It can be utilized in automation and control systems to perform tasks such as monitoring sensors, controlling equipment, and communicating with other devices.
2. Automotive applications: The microcontroller can be employed in automotive systems for tasks like engine management, body control, instrument clusters, and more.
3. Consumer electronics: It can be integrated into devices such as home appliances, audio/video equipment, and gaming consoles to provide control, processing, and connectivity capabilities.
4. Communication systems: The microcontroller can be used in communication devices, such as modems and routers, to handle data processing and control functions.

Specifications

Product Name	MB90F598	Product Type	Microcontroller
Series	F2MC-8FX	Core Processor	8FX
Core Size	8-Bit	Speed	20MHz
Connectivity	I²C, SPI, UART	Peripherals	ADC, PWM, WDT
Number of I/Os	46	Program Memory Size	32KB
Data RAM Size	1KB	Voltage - Supply	2.7 V ~ 5.5 V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Surface Mount

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

C**e 10/01/2023

Impressed with Avaq's lightning-fast delivery! The MB90F598 components arrived in record time, and I was able to complete my project ahead of schedule.

K**r 04/09/2023

Avaq exceeded my expectations with their speedy delivery of the MB90F598 components. I received them in pristine condition, packed securely. A reliable distributor.

R**f 09/24/2022

These MB90F598 electronic components from Avaq are top-notch. The quality is exceptional, and they work flawlessly for my project. Highly recommended!

N**a 09/09/2022

I couldn't be happier with my purchase from Avaq. The MB90F598 components are genuine and perform brilliantly. Will definitely turn to them for all my electronic needs.