This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MX25L512MC-12G +BOM

Advanced NOR Flash technology enables high-speed, low-power data storage and management solutions

Manufacturer:

Macronix International
Mfr.Part #:

MX25L512MC-12G
Datasheet:

MX25L512MC-12G Datasheet (PDF)
ECCN (US):

EAR99
Automotive:

No
PPAP:

No
Cell Type:

NOR
EDA/CAD Models:

Request Free CAD Models for MX25L512MC-12G

Key Features

GENERAL
Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3
1,048,576 x 1 bit structure
32 Equal Sectors with 4K byte each
- Any Sector can be erased individually
2 Equal Blocks with 64K byte each
- Any Block can be erased individually
Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
Latch-up protected to 100mA from -1V to Vcc +1V
Low Vcc write inhibit is from 1.5V to 2.5V
PERFORMANCE
High Performance
- Fast access time: 85MHz serial clock (15pF + 1TTL Load) and 66MHz serial clock (30pF + 1TTL Load)
- Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page)
- Fast erase time: 60ms(typ.) and 120ms(max.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-byte per block)
Low Power Consumption
- Low active read current: 12mA(max.) at 85MHz, 8mA(max.) at 66MHz and 4mA(max.) at 33MHz
- Low active programming current: 15mA (max.)
- Low active erase current: 15mA (max.)
- Low standby current: 10uA (max.)
- Deep power-down mode 1uA (typical)
Minimum 100,000 erase/program cycles
SOFTWARE FEATURES
Input Data Format
- 1-byte Command code
Block Lock protection
- The BP0~BP1 status bit defines the size of the area to be software protected against Program and Erase instructions.
Auto Erase and Auto Program Algorithm
- Automatically erases and verifies data at selected sector
- Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first)
Status Register Feature
Electronic Identification
- JEDEC 2-byte Device ID
- RES command, 1-byte Device ID
HARDWARE FEATURES
SCLK Input
- Serial clock input
SI Input
- Serial Data Input
SO Output
- Serial Data Output
WP# pin
- Hardware write protection
HOLD# pin
- pause the chip without diselecting the chip
PACKAGE
- 8-pin SOP (150mil)
- 8-land USON (2x3x0.6mm)
- All Pb-free devices are RoHS Compliant

Specifications

ECCN (US)	EAR99	Part Status	Obsolete
Automotive	No	PPAP	No
Cell Type	NOR	Chip Density (bit)	512K
Architecture	Sectored	Boot Block	No
Block Organization	Symmetrical	Address Bus Width (bit)	1
Sector Size	4Kbyte x 16	Number of Bits/Word (bit)	1
Number of Words	512K	Programmability	Yes
Timing Type	Synchronous	Max. Access Time (ns)	30(Min)
Maximum Erase Time (s)	2/Chip	Maximum Programming Time (ms)	5/Page
Interface Type	Serial-SPI	Minimum Operating Supply Voltage (V)	2.7
Typical Operating Supply Voltage (V)	3.3	Maximum Operating Supply Voltage (V)	3.6
Programming Voltage (V)	2.7 to 3.6	Operating Current (mA)	12
Program Current (mA)	15	Minimum Operating Temperature (°C)	0
Maximum Operating Temperature (°C)	70	Supplier Temperature Grade	Commercial
Command Compatible	Yes	ECC Support	No
Support of Page Mode	No	Mounting	Surface Mount
PCB changed	8	Pin Count	8
Lead Shape	Gull-wing