Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Precision Timers
DIP8Manufacturer:
Mfr.Part #:
NA555P
Datasheet:
Type:
555 Type, Timer/Oscillator (Single)
Frequency:
100kHz
Voltage - Supply:
4.5V ~ 16V
Current - Supply:
10 mA
EDA/CAD Models:
Please fill in the short form below and we will provide you the quotation immediately.
These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor.
The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground.
The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs.
Category | Integrated Circuits (ICs)Clock/TimingProgrammable Timers and Oscillators | Series | - |
Type | 555 Type, Timer/Oscillator (Single) | Count | - |
Frequency | 100kHz | Voltage - Supply | 4.5V ~ 16V |
Current - Supply | 10 mA | Operating Temperature | -40°C ~ 105°C |
Mounting Type | Through Hole | Base Product Number | NA555 |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
5+ | $0.271 | $1.36 |
50+ | $0.220 | $11.00 |
150+ | $0.198 | $29.70 |
500+ | $0.171 | $85.50 |
2500+ | $0.159 | $397.50 |
5000+ | $0.152 | $760.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for NA555P, guaranteed quotes back within
12hr.
Good seller. Fast shipping. Good leds.