This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

NE5534N +BOM

General Purpose Amplifier 1 Circuit 8-PDIP

Manufacturer:

onsemi
Mfr.Part #:

NE5534N
Datasheet:

NE5534N Datasheet (PDF)
Amplifier Type:

General Purpose
Number Of Circuits:

1
Slew Rate:

13V/µs
Gain Bandwidth Product:

10 MHz
EDA/CAD Models:

Request Free CAD Models for NE5534N

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

NE5534N General Description

Boasting high performance and low noise characteristics, the NE5534N is a single op-amp that stands out from the competition. Its impressive noise performance, superior output drive capability, and expanded bandwidth make it well-suited for a variety of applications, including high-quality audio equipment, instrumentation systems, and telephone channel amplifiers. This op-amp is internally compensated for gain greater than three, and its frequency response can be easily adjusted with an external compensation capacitor to meet specific requirements. With its exceptional features and reliable performance, the NE5534N is a versatile and valuable component in any circuit design

Key Features

Small-Signal Bandwidth: 10 MHz
Output Drive Capability: 600 Ω,10 VRMS at VS = ±18 V
Input Noise Voltage: 4 nV/(Hz)^0.5
DC Voltage Gain: 100000
AC Voltage Gain: 6000 at 10 kHz
Power Bandwidth: 200 kHz
Slew Rate: 13 V/µs
Large Supply Voltage Range: ±3.0 to ±20 V

Application

Microphone Preamplifiers
Audio Mixers
Active Filters

Specifications

Amplifier Type	General Purpose	Number of Circuits	1
Output Type	-	Slew Rate	13V/µs
Gain Bandwidth Product	10 MHz	-3db Bandwidth	-
Current - Input Bias	500 nA	Voltage - Input Offset	500 µV
Current - Supply	4mA	Current - Output / Channel	38 mA
Voltage - Supply Span (Min)	6 V	Voltage - Supply Span (Max)	40 V
Operating Temperature	0°C ~ 70°C	Mounting Type	Through Hole
Product Category	Operational Amplifiers - Op Amps	Mounting Style	Through Hole
Number of Channels	1 Channel	Supply Voltage - Max	+/- 20 V
GBP - Gain Bandwidth Product	10 MHz	Output Current per Channel	38 mA
SR - Slew Rate	13 V/us	Vos - Input Offset Voltage	4 mV
Supply Voltage - Min	+/- 3 V	Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 70 C	Ib - Input Bias Current	1.5 uA
Operating Supply Current	8 mA	Shutdown	No Shutdown
CMRR - Common Mode Rejection Ratio	70 dB	en - Input Voltage Noise Density	7 nV/sqrt Hz
Dual Supply Voltage	+/- 5 V, +/- 9 V, +/- 12 V	Height	5.33 mm (Max)
In - Input Noise Current Density	2.5 pA/sqrt Hz	Length	9.27 mm
Maximum Dual Supply Voltage	+/- 20 V	Minimum Dual Supply Voltage	+/- 3 V
Operating Supply Voltage	+/- 3 V to +/- 20 V	Pd - Power Dissipation	1.15 W
Product	Operational Amplifiers	Product Type	Op Amps - Operational Amplifiers
PSRR - Power Supply Rejection Ratio	100 dB	Factory Pack Quantity	1000
Subcategory	Amplifier ICs	Supply Type	Dual
Technology	Bipolar	Vcm - Common Mode Voltage	Negative Rail + 3 V to Positive Rail - 3 V
Voltage Gain dB	100 dB	Width	6.35 mm
Unit Weight	0.032805 oz