This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

P2703AAL +BOM

Compact and robust solution for industrial power application

230V Off-State 150 A Ipp TVS Thyristor 3-SIP

The SIDACtor device is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20,K.21 and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).
Notes:
All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
IPP is a repetitive surge rating and is guaranteed for the life of the product.
Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
VDRM is measured at IDRM.
VS is measured at 100 V/µs.
Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
Off-state capacitance is measured between Pins 1-2 and 3-2 at 1 MHz with a 2 V bias and is a typical value for product. and capacitance is approximately 2x the listed value.
Device is designed to meet balance requirements of GTS 8700 and GR 974.

Product Category	Thyristor Surge Protection Devices - TSPD	Breakover Voltage VBO	300 V
Breakover Current IBO Max	800 mA	Non Repetitive On-State Current	20 A
Rated Repetitive Off-State Voltage VDRM	230 V	Off-State Leakage Current @ VDRM IDRM	5 uA
Holding Current Ih Max	150 mA	On-State Voltage	8 V
Off-State Capacitance CO	10 pF to 25 pF, 15 pF to 35 pF	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Mounting Style	Through Hole
Current Rating	2.2 A	Product Type	TSPDs
Series	pxxx3a_	Factory Pack Quantity	500
Subcategory	Thyristors	Tradename	SIDACtor
Unit Weight	0.211644 oz