This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PI2EQXDP101-AZFE +BOM

Streamline your digital workflow with this high-performance DisplayPort re-driver IC in a compact package

Buffer, ReDriver 1 Channel 2.7Gbps 36-TQFN (6x5)

DisplayPort™ 1.1a operation at reduced bit rate (1.62Gbps) and high bit rate (2.7Gbps)
Jitter elimination circuits automatically adjust link via training path
Pre-Emphasis, and output swing
Can support all 4 levels of output swing and 4 levels outputpre-emphasis, as specified in the DisplayPort 1.1a spec.
AUX interception circuit only listens to the link training, but does not affect link training
Low insertion loss across the AUX signal path (0.35dB @1Mbps)
Output can support dual mode DP by providing DDC signals across the AUX_sink pins
Using Cable Detect pin from DP connector (pin 13), the switch can toggle between DP and TMDS mode.
Automatic power down state when HPD signal is LOW
Enters low power mode when no data signal is present
Dual power supply (1.5V and 3.3V)
2KV HBM ESD protection
50 ohm output termination can be turned off when port is off
Port is turned off automatically when not needed
Package (Pb-Free & Green available)
36-pin TQFN (ZF)

Category	Integrated Circuits (ICs)InterfaceSignal Buffers, Repeaters, Splitters	Series	ReDriver™
Type	Buffer, ReDriver	Applications	DisplayPort
Input	DisplayPort	Output	DisplayPort
Data Rate (Max)	2.7Gbps	Number of Channels	1
Delay Time	-	Signal Conditioning	Input Equalization, Output Pre-Emphasis
Voltage - Supply	1.5V, 3.3V	Current - Supply	-
Operating Temperature	0°C ~ 85°C	Mounting Type	Surface Mount
Base Product Number	PI2EQXDP101