This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PTH03030WAH +BOM

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 2.5V 30A 2.95V - 3.65V Input

Manufacturer:

Artesyn Embedded Power
Mfr.Part #:

PTH03030WAH
Datasheet:

PTH03030WAH Datasheet (PDF)
Series:

PTH03030W
Type:

Non-Isolated PoL Module
Number Of Outputs:

1
Voltage - Input (Min):

2.95V

Key Features

Up to 30-A Output Current
3.3-V Input Voltage
Wide-Output Voltage Adjust (0.8 V to 2.5 V)
135 W/in3 Power Density
Efficiencies up to 93%
On/Off Inhibit
Output Voltage Sense
Pre-Bias Startup
Margin Up/Down Controls
Under-Voltage Lockout
Auto-Track? Sequencing
Output Over-Current Protection (Non-Latching, Auto-Reset)
Operating Temp: –40 to +85°C
Over-Temperature Shutdown
Safety Agency Approvals: UL 1950, CSA 22.2 950, EN60950 VDE (Pending)
Point-of-Load Alliance (POLA) Compatible

Description

The PTH03030 is a high-current non-isolated power module from Texas Instruments. The product is characterized by high efficiencies, and up to 30 A of output current, while occupying a mere 1.64 in2 of PCB area. In terms of cost, size, and performance, the PTH03030 provides OEM’s with a flexible module that meets the requirements of the most complex and demanding mixed-signal applications. These include the most densly populated, multi-processor systems that incorporate high-speed DSP’s, microprocessors, and ASICs.

The series uses double-sided surface mount construction and provides high-performance step-down power conversion from a 3.3-V input bus voltage. The output voltage of the PTH03030W can be set to any value over the range 0.8 V to 2.5 V, using a single resistor.

This series includes Auto-Track?. Auto-Track simplifies power-up and power-down supply voltage sequencing in a system by enabling modules to track each other, or any other external voltage.

Each model also includes an on/off inhibit, output voltage adjust (trim), and margin up/down controls. An output voltage sense ensures tight load regulation, and an output over-current and thermal shutdown feature provide for protection against external load faults.

Package options inlude both through-hole and surface mount connfigurations.

Specifications

Category	Power Supplies - Board MountDC DC Converters	Series	PTH03030W
Type	Non-Isolated PoL Module	Number of Outputs	1
Voltage - Input (Min)	2.95V	Voltage - Input (Max)	3.65V
Voltage - Output 1	0.8 ~ 2.5V	Voltage - Output 2	-
Voltage - Output 3	-	Current - Output (Max)	30A
Applications	ITE (Commercial)	Features	-
Operating Temperature	-40°C ~ 85°C	Efficiency	93%
Mounting Type	Through Hole	Size / Dimension	1.37" L x 1.12" W x 0.35" H (34.8mm x 28.4mm x 8.9mm)
Base Product Number	PTH03030