This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SA160 +BOM

257V Clamp 2A Ipp Tvs Diode Through Hole DO-204AC (DO-15)

Manufacturer:

Diotec Semiconductor
Mfr.Part #:

SA160
Datasheet:

SA160 Datasheet (PDF)
Mounting Style:

SMD/SMT
Vr - Reverse Voltage:

1 kV
If - Forward Current:

1 A
Type:

Fast Recovery Rectifiers
EDA/CAD Models:

Request Free CAD Models for SA160

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SA160 General Description

Our SA160 product boasts a fast response time, typically less than 1.0ps from 0 Volts to BV min, providing rapid protection when it's needed most. The excellent clamping capability and low incremental surge resistance further enhance its effectiveness in safeguarding electronics from transient voltage events. Additionally, the high temperature soldering guarantee and Underwriters Laboratory Flammability classification 94V-0 for the plastic package ensure that this product meets the highest safety standards

Key Features

500W peak pulse capability at 10/1000μs waveform, repetition rate
(duty cycles):0.01%
VBR @ TJ=
x (1+α T x (TJ - 25))
(α T:Temperature Coeffcient, typical value is 0.1%)
Glass passivated chip junction in DO-15 Package
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specifed voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
EFT protection of data lines in accordance with IEC 61000-4-4
Low incremental surge resistance
Typical IR less than 1μA when VBR max>13V
High temperature to reﬂow soldering guaranteed:
260°C/40sec/0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension
Plastic package is ﬂammability rated V-0 per Underwriters Laboratories
Matte tin lead–free plated
Halogen free and RoHS compliant
Pb-free E3 means 2nd level interconnect is Pb-free and
the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

Specifications

Product Category	Rectifiers	Mounting Style	SMD/SMT
Vr - Reverse Voltage	1 kV	If - Forward Current	1 A
Type	Fast Recovery Rectifiers	Configuration	Single
Vf - Forward Voltage	1.3 V	Max Surge Current	35 A
Ir - Reverse Current	5 uA	Recovery Time	300 ns
Minimum Operating Temperature	- 50 C	Maximum Operating Temperature	+ 175 C
Series	SA1/2	Product	Rectifiers
Product Type	Rectifiers	Factory Pack Quantity	5000
Subcategory	Diodes & Rectifiers	Tradename	SA160
Unit Weight	0.006984 oz