This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SC18IS606PWJ +BOM

I2C-bus to SPI bridge

Manufacturer:

NXP Semiconductor
Mfr.Part #:

SC18IS606PWJ
Datasheet:

SC18IS606PWJ Datasheet (PDF)
Number Of Pins:

16
Input:

I2C bus
Buffer Size:

1024
Interface And Input Control:

I2C / I2C,SPI / SPI
EDA/CAD Models:

Request Free CAD Models for SC18IS606PWJ

SC18IS606PWJ General Description

SC18IS606 is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. SC18IS606 operates as an I2C-bus targettransmitter or target-receiver and an SPI master. SC18IS606 controls all the SPI busspecific sequences, protocol, and timing. SC18IS606 has its own internal oscillator, and it supports three SPI chip select outputs that may be configured as GPIO when not used as SPI chip select.

Key Features

• I²C-bus target interface operating up to 400 kHz
• SPI master operating up to 1.8 Mbit/s
• 1024-byte data buffer
• Up to three slave select outputs
• Up to three programmable I/O pins
• Operating supply voltage: 1.71 V to 3.6 V
• Low power mode
• Internal oscillator
• Active LOW interrupt output
• ESD protection exceeds 2000 V HBM per JESD22-A114
• Latch-up testing is done to JEDEC Standard JESD78 that exceeds 100 mA
• Available in 16-pin TSSOP

Application

• Converting I2C-bus to SPI
• Adding additional SPI bus controllers to an existing system

Specifications

Number of pins	16	Input	I2C bus
Buffer size	1024	Security Status	COMPANY PUBLIC
Interface and Input Control	I2C / I2C,SPI / SPI	Description	I2C-bus to SPI bridge
Host Interface	I2C,SPI	Diagnostics	I2C,SPI
Output	SPI

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

L**m 07/04/2023

Arrived in a couple of weeks.

K**n 01/30/2023

Very well. Delivered in 16 days in bubble craft envelopeThe tip of the handle received is slightly different from the initial photo, but it does not bother anything.

Z**y 07/02/2022

Zummer received, the order to the saratov region was delivered in 39 days. Very long!!! Checked, all the workers. I will put 5 stars. Seller recommend. The hole itself is glued with a sticker. No sticker sounds loud. Connected at 5, 9,12 v. Everything squeaks!!!

Z**e 09/22/2021

Hopefully the are all warm. Thanks.