This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SMBJ26A +BOM

600W Surface Mount Transient Voltage Suppressor

Manufacturer:

Meritek
Mfr.Part #:

SMBJ26A
Datasheet:

SMBJ26A Datasheet (PDF)
Part Life Cycle Code:

Active
Reach Compliance Code:

not_compliant
ECCN Code:

EAR99
HTS Code:

8541.10.00.50
EDA/CAD Models:

Request Free CAD Models for SMBJ26A

SMBJ26A General Description

Direction Type = Uni-Directional / Reverse Stand-off Voltage Max. V = 26 / Clamping Voltage V = 42.1 / Peak Pulse Power Dissipation W = 600 / Peak Pulse Current A = 14.3 / Breakdown Voltage Min. V = 28.9 / Breakdown Voltage Max. V = 31.9 / Operating Temperature Max. °C = 150 / Operating Temperature Min. °C = -65 / Reverse Leakage Current Max. uA = 1 / Voltage ESD Air Gap Max. kV = 30 / Voltage ESD Contact Max. kV = 30 / Pins = 2 / Package Type = DO-214AB / Mounting Type = SMD / MSL = Level-1 / Packaging = Tape & Reel / Reflow Temperature Max. °C = 217

Key Features

Excellent clamping capability
Low incremental surge resistance
Typical I
R
less than 1µA above 12V
For surface mounted applications to optimize board space
Low profile package
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Built-in strain relief
Fast response time: typically less than 1.0ps from 0V to BV min
600W peak pulse power capability at 10×1000μs waveform, repetition rate (duty cycles):0.01%
Typical maximum temperature coefficient ΔV
BR
= 0.1% × V
BR
@25°C × ΔT
Glass passivated chip junction
High temperature soldering guaranteed: 260°C/40 seconds at terminals
Plastic package has underwriters laboratory flammability 94V-O
Matte tin lead–free plated
Halogen free and RoHS compliant

Application

TVS devices are ideal for the protection of I/O Interfaces, V
CC
bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.

Specifications

Part Life Cycle Code	Active	Reach Compliance Code	not_compliant
ECCN Code	EAR99	HTS Code	8541.10.00.50
Additional Feature	EXCELLENT CLAMPING CAPABILITY	Breakdown Voltage-Max	31.9 V
Breakdown Voltage-Min	28.9 V	Breakdown Voltage-Nom	30.4 V
Clamping Voltage-Max	42.1 V	Configuration	SINGLE
Diode Element Material	SILICON	Diode Type	TRANS VOLTAGE SUPPRESSOR DIODE
Forward Voltage-Max (VF)	3.5 V	JEDEC-95 Code	DO-214AA
JESD-30 Code	R-PDSO-C2	JESD-609 Code	e3
Moisture Sensitivity Level	1	Non-rep Peak Rev Power Dis-Max	600 W
Number of Elements	1	Number of Terminals	2
Operating Temperature-Max	150 °C	Operating Temperature-Min	-55 °C
Peak Reflow Temperature (Cel)	260	Polarity	UNIDIRECTIONAL
Power Dissipation-Max	3 W	Qualification Status	Not Qualified
Rep Pk Reverse Voltage-Max	26 V	Reverse Current-Max	1 µA
Reverse Test Voltage	26 V	Surface Mount	YES
Technology	AVALANCHE	Terminal Finish	MATTE TIN
Terminal Form	C BEND	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30