This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SMF14A +BOM

23.2V Clamp 8.6A Ipp Tvs Diode Surface Mount SOD-123W

Manufacturer:

Meritek
Mfr.Part #:

SMF14A
Datasheet:

SMF14A Datasheet (PDF)
Part Life Cycle Code:

Active
Reach Compliance Code:

not_compliant
ECCN Code:

EAR99
HTS Code:

8541.10.00.50
EDA/CAD Models:

Request Free CAD Models for SMF14A

SMF14A General Description

I. The SMF14A is part of the SMF series, which is expertly crafted to safeguard delicate electronic devices from voltage transients that can be caused by lightning and other transient voltage events. What sets the SMF package apart is its remarkable compactness - it boasts a 50% smaller footprint than the SMA package, making it an ideal choice for situations where space is at a premium. Additionally, this product delivers one of the lowest height profiles (1.1mm) in the industry, ensuring that it can easily be integrated into various electronic setups without causing any disruptions. When it comes to protecting sensitive equipment, the SMF14A stands out as a reliable and efficient solution

Key Features

:
200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01%
Compatible with industrial standard package SOD-123FL
Low profile: maximum height of 1.1mm.
Low inductance, excellent clamping capability
For surface mounted applications to optimize board space
High temperature to reflow soldering guaranteed: 260°C/430sec
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
EFT protection of data lines in accordance with IEC 61000-4-4
Fast response time: typically less than 1.0ns from 0 Volts to VBR min
Glass passivated junction
Built-in strain relief
Plastic package is flammability rated V-0 per Underwriters Laboratories
Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
Matte tin lead–free plated
Halogen-free and RoHS compliant
Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01)
UL Recognized to UL 497B

Application

:
SMF devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit used in cellular phones, portable devices, business machines, power supplies and other consumer applications.

Specifications

Part Life Cycle Code	Active	Reach Compliance Code	not_compliant
ECCN Code	EAR99	HTS Code	8541.10.00.50
Additional Feature	EXCELLENT CLAMPING CAPABILITY	Breakdown Voltage-Max	17.2 V
Breakdown Voltage-Min	15.6 V	Breakdown Voltage-Nom	16.4 V
Clamping Voltage-Max	23.2 V	Configuration	SINGLE
Diode Element Material	SILICON	Diode Type	TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 Code	R-PDSO-F2	JESD-609 Code	e3
Moisture Sensitivity Level	1	Non-rep Peak Rev Power Dis-Max	1000 W
Number of Elements	1	Number of Terminals	2
Operating Temperature-Max	150 °C	Operating Temperature-Min	-65 °C
Peak Reflow Temperature (Cel)	260	Polarity	UNIDIRECTIONAL
Power Dissipation-Max	1 W	Reference Standard	IEC-61000-4-2, 4-4; UL RECOGNIZED
Rep Pk Reverse Voltage-Max	14 V	Reverse Current-Max	1 µA
Reverse Test Voltage	14 V	Surface Mount	YES
Technology	AVALANCHE	Terminal Finish	MATTE TIN
Terminal Form	FLAT	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30