This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SMF16A +BOM

26V Clamp 7.7A Ipp Tvs Diode Surface Mount SOD-123F

Manufacturer:

Littelfuse Inc.
Mfr.Part #:

SMF16A
Datasheet:

SMF16A Datasheet (PDF)
Part Life Cycle Code:

Active
Reach Compliance Code:

not_compliant
ECCN Code:

EAR99
HTS Code:

8541.10.00.50
EDA/CAD Models:

Request Free CAD Models for SMF16A

SMF16A General Description

The SMF16A, a part of the SMF series, is meticulously crafted to protect sensitive electronic equipment from voltage transients induced by lightning and other transient events. One of its standout features is the compact SMF package, which is 50% smaller in footprint compared to traditional SMA packages. Moreover, it offers an exceptionally low height profile of 1.1mm, setting a new standard in the industry. This makes the SMF16A an ideal choice for applications where space is limited, and a sleek, unobtrusive design is essential. With its innovative design and superior performance, the SMF16A offers reliable protection without compromise

Key Features

:
200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01%
Compatible with industrial standard package SOD-123FL
Low profile: maximum height of 1.1mm.
Low inductance, excellent clamping capability
For surface mounted applications to optimize board space
High temperature to reflow soldering guaranteed: 260°C/430sec
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
EFT protection of data lines in accordance with IEC 61000-4-4
Fast response time: typically less than 1.0ns from 0 Volts to VBR min
Glass passivated junction
Built-in strain relief
Plastic package is flammability rated V-0 per Underwriters Laboratories
Meet MSL level1, per J-STD-020, LF maximun peak of 260°C
Matte tin lead–free plated
Halogen-free and RoHS compliant
Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01)
UL Recognized to UL 497B

Application

:
SMF devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit used in cellular phones, portable devices, business machines, power supplies and other consumer applications.

Specifications

Part Life Cycle Code	Active	Reach Compliance Code	not_compliant
ECCN Code	EAR99	HTS Code	8541.10.00.50
Additional Feature	EXCELLENT CLAMPING CAPABILITY	Breakdown Voltage-Max	19.7 V
Breakdown Voltage-Min	17.8 V	Breakdown Voltage-Nom	18.75 V
Clamping Voltage-Max	26 V	Configuration	SINGLE
Diode Element Material	SILICON	Diode Type	TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 Code	R-PDSO-F2	JESD-609 Code	e3
Moisture Sensitivity Level	1	Non-rep Peak Rev Power Dis-Max	1000 W
Number of Elements	1	Number of Terminals	2
Operating Temperature-Max	150 °C	Operating Temperature-Min	-65 °C
Peak Reflow Temperature (Cel)	260	Polarity	UNIDIRECTIONAL
Power Dissipation-Max	1 W	Reference Standard	IEC-61000-4-2, 4-4; UL RECOGNIZED
Rep Pk Reverse Voltage-Max	16 V	Reverse Current-Max	1 µA
Reverse Test Voltage	16 V	Surface Mount	YES
Technology	AVALANCHE	Terminal Finish	MATTE TIN
Terminal Form	FLAT	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30