Payment Method
SN75115DR +BOM
Dual differential line driver for reliable data transmission over long distances
16-SOIC(0.154",3.90mmWidth)-
Manufacturer:
Texas Instruments
-
Mfr.Part #:
SN75115DR
-
Datasheet:
-
Series:
75000
-
Type:
Receiver
-
Number Of Drivers/Receivers:
0/2
-
Voltage - Supply:
4.75V ~ 5.25V
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for SN75115DR, guaranteed quotes back within 12hr.
Availability: 8513 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SN75115DR General Description
Designed for efficient detection of small differential signals in the presence of substantial common-mode noise, the SN75115DR dual differential line receiver delivers TTL-compatible output signals based on the input voltage difference. Featuring an open-collector output configuration, this device enables wire-ANDing of similar TTL outputs or other line receivers, allowing for seamless logic implementation without additional delay. The output stages, akin to TTL totem-pole outputs, provide sink outputs and active pullup terminals on adjacent pins within the package. Additionally, a strobe input for each channel facilitates receiver disabling and forces outputs to a high level when the strobe signal is low. Operating across different temperature ranges, the SN55115 functions in the military temperature range of -55°C to 125°C, while the SN75115 operates effectively within the 0°C to 70°C temperature range
Key Features
- Multiple Protocol Support
- Built-In Encryption and Authentication
- Redundancy and Error Detection Mechanisms
Specifications
Series | 75000 | Type | Receiver |
Protocol | - | Number of Drivers/Receivers | 0/2 |
Duplex | - | Data Rate | - |
Voltage - Supply | 4.75V ~ 5.25V | Operating Temperature | 0°C ~ 70°C |
Mounting Type | Surface Mount | Base Product Number | SN75115 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 8,513
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $2.039 | $2.04 |
200+ | $0.789 | $157.80 |
500+ | $0.761 | $380.50 |
1000+ | $0.749 | $749.00 |
The prices below are for reference only.
Featured Products
Top Sellers
-
CP2102
Silicon Laboratories
Integrate seamlessly into your design with our reliable interface I
-
MAX232
Texas Instruments
This V device features bps data transfer rates and robust ESD protection
-
W5500
Wiznet
With its comprehensive set of protocols and interfaces, this IC streamlines network development and deploymen
-
TJA1050
Nxp
Robust and reliable high-speed communication solution for demanding application
-
RTL2832U
Realtek
High-performance demodulation for DVB-T signals, plug-and-play via US