Payment Method
SN75176B +BOM
Differential bus transceiver
PDIP (P)-8,SOIC (D)-8,SOP (PS)-8,— (—)-—-
Manufacturer:
-
Mfr.Part #:
SN75176B
-
Datasheet:
-
Number Of Receivers:
1
-
Number Of Transmitters:
1
-
Duplex:
Half
-
Supply Voltage (nom) (V):
5
-
EDA/CAD Models:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for SN75176B, guaranteed quotes back within 12hr.
Availability: 7138 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SN75176B General Description
The SN65176B and SN75176B differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet ANSI Standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27.
The SN65176B and SN75176B devices combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form differential input/output (I/O) bus ports that are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0. These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
The driver is designed for up to 60 mA of sink or source current. The driver features positive and negative current limiting and thermal shutdown for protection from line-fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 150°C. The receiver features a minimum input impedance of 12 kΩ, an input sensitivity of ±200 mV, and a typical input hysteresis of 50 mV.
Key Features
- Bidirectional transceivers
- Meet or exceed the requirements of ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU Recommendations V.11 and X.27
- Designed for multipoint transmission on long bus lines in noisy environments
- 3-State driver and receiver outputs
- Individual driver and receiver enables
- Wide positive and negative input/output bus voltage ranges
- ± 60-mA Maximum driver output capability
- Thermal shutdown protection
- Driver positive and negative current limiting
- 12-kΩ Minimum Receiver Input Impedance
- ± 200-mV Receiver input sensitivity
- 50-mV Typical receiver input hysteresis
- Operate from single 5-V supply
Specifications
Number of receivers | 1 | Number of transmitters | 1 |
Duplex | Half | Supply voltage (nom) (V) | 5 |
Signaling rate (max) (MBits) | 10 | IEC 61000-4-2 contact (±V) | None |
Fault protection (V) | -10 to 15 | Common-mode range (V) | -7 to 12 |
Number of nodes | 32 | Isolated | No |
Supply current (max) (µA) | 70000 | Rating | Catalog |
Operating temperature range (°C) | 0 to 70 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,138
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.