Payment Method
SNJ55173J +BOM
Quad Receiver RS-422/RS-423/RS-485 16-Pin CDIP Tube
CDIP-
Manufacturer:
Texas Instruments
-
Mfr.Part #:
SNJ55173J
-
Datasheet:
-
Series:
*
-
EDA/CAD Models:
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for SNJ55173J, guaranteed quotes back within 12hr.
Availability: 8458 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SNJ55173J General Description
The SN55173, SN65173, and SN75173 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, TIA/EIA-485-A, and several ITU recommendations. The standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable inputs, one active when high, the other active when low. These devices feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of \x9612 V to 12 V. Fail-safe design specifies that if the inputs are open circuited, the outputs are always high. The SN65173 and SN75173 are designed for optimum performance when used with the SN75172 or SN75174 quad differential line drivers.
The SN55173 is characterized over the full military temperature range of \x9655°C to 125°C. The SN65173 is characterized for operation from \x9640°C to 85°C. The SN75173 is characterized for operation from 0°C to 70°C.
Key Features
- Meet or Exceed the Requirements of TIA/EIA-422-B, TIA/EIA-423-B, and TIA/EIA-485-A and ITU Recommendations V.10, V.11, X.26, and X.27
- Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
- 3-State Outputs
- Common-Mode Input Voltage Range of \x9612 V to 12 V
- Input Sensitivity . ±200 mV
- Input Hysteresis . . . 50 mV Typ
- High Input Impedance . . . 12 k Min
- Operate From Single 5-V Supply
- Low Power Requirements
- Pin-to-Pin Replacement for AM26LS32
THE SN55173 IS NOT RECOMMENDED FOR NEW DESIGNS.
Specifications
Series | * |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 8,458
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $121.806 | $121.81 |
200+ | $47.138 | $9,427.60 |
500+ | $45.481 | $22,740.50 |
1000+ | $44.663 | $44,663.00 |
The prices below are for reference only.
Featured Products
Top Sellers
-
CP2102
Silicon Laboratories
Integrate seamlessly into your design with our reliable interface I
-
MAX232
Texas Instruments
This V device features bps data transfer rates and robust ESD protection
-
W5500
Wiznet
With its comprehensive set of protocols and interfaces, this IC streamlines network development and deploymen
-
TJA1050
Nxp
Robust and reliable high-speed communication solution for demanding application
-
RTL2832U
Realtek
High-performance demodulation for DVB-T signals, plug-and-play via US