Payment Method
SNJ55LBC176FK +BOM
Differential Bus Transceiver
CLCC-
Manufacturer:
-
Mfr.Part #:
SNJ55LBC176FK
-
Datasheet:
-
Number Of Receivers:
1
-
Number Of Transmitters:
1
-
Duplex:
Half
-
Supply Voltage (nom) (V):
5
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for SNJ55LBC176FK, guaranteed quotes back within 12hr.
Availability: 4046 PCS
Please fill in the short form below and we will provide you the quotation immediately.
SNJ55LBC176FK General Description
These transceivers are suitable for ANSI Standard TIA/EIA−485 (RS-485) and ISO 8482 applications to the extent that they are specified in the operating conditions and characteristics section of this data sheet. Certain limits contained in TIA/EIA−485−A and ISO 8482:1987 (E) are not met or cannot be tested over the entire military temperature range.
The SN55LBC176 is characterized for operation from –55°C to 125°C. The SN65LBC176 is characterized for operation from –40°C to 85°C, and the SN65LBC176Q is characterized for operation from –40°C to 125°C. The SN75LBC176 is characterized for operation from 0°C to 70°C.
Key Features
- Bidirectional Transceiver
- Meets or Exceeds the Requirements of ANSI Standard TIA/EIA−485−A and ISO 8482:1987(E)
- High-Speed Low-Power LinBiCMOS™ Circuitry
- Designed for High-Speed Operation in Both Serial and Parallel Applications
- Low Skew
- Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
- Very Low Disabled Supply Current . . . 200 µA Maximum
- Wide Positive and Negative Input/Output Bus Voltage Ranges
- Thermal-Shutdown Protection
- Driver Positive-and Negative-Current Limiting
- Open-Circuit Failsafe Receiver Design
- Receiver Input Sensitivity . . . ±200 mV Max
- Receiver Input Hysteresis . . . 50 mV Typ
- Operates From a Single 5-V Supply
- Glitch-Free Power-Up and Power-Down Protection
- Available in Q-Temp Automotive HighRel Automotive Applications Configuration Control / Print Support Qualification to Automotive Standards
Specifications
Number of receivers | 1 | Number of transmitters | 1 |
Duplex | Half | Supply voltage (nom) (V) | 5 |
Signaling rate (max) (MBits) | 10 | Fault protection (V) | -10 to 15 |
Common-mode range (V) | -7 to 12 | Number of nodes | 32 |
Isolated | No | Supply current (max) (µA) | 5400 |
Rating | Military | Operating temperature range (°C) | -55 to 125 |
feature-function | Line Transceiver | feature-data-rate | 10Mbps |
feature-transmitter-communication-type | RS-485 | feature-receiver-communication-type | RS-485 |
feature-number-of-transceivers | 1 | feature-number-of-transmitters | 1 |
feature-number-of-receivers | 1 | feature-transmitter-signal-type | Differential |
feature-receiver-signal-type | Differential | feature-number-of-drivers-per-line | 32 |
feature-number-of-receivers-per-line | 32 | feature-driving-mode | 3-State |
feature-power-supply-type | Single | feature-minimum-single-supply-voltage-v | 4.75 |
feature-maximum-single-supply-voltage-v | 5.25 | feature-minimum-dual-supply-voltage-v | |
feature-maximum-dual-supply-voltage-v | feature-maximum-supply-current-ma | 1.75 | |
feature-packaging | Tube | feature-rad-hard | No |
feature-pin-count | 20 | feature-cecc-qualified | No |
feature-esd-protection | Yes | feature-escc-qualified | |
feature-military | Yes | feature-aec-qualified | No |
feature-aec-qualified-number | feature-eccn-code | EAR99 | |
feature-svhc | Yes | feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 4,046
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.