This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SST89E516RD2-40-I-NJE +BOM

8-bit Microcontroller with 64KB of program memory and 8KB of data memory running at 40MHz

Manufacturer:

MICROCHIP
Mfr.Part #:

SST89E516RD2-40-I-NJE
Datasheet:

SST89E516RD2-40-I-NJE Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Obsolete
Pin Count:

44
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for SST89E516RD2-40-I-NJE

SST89E516RD2-40-I-NJE General Description

Elevate your projects to new heights with the SST89E516RD2-40-I-NJE, a powerhouse microcontroller designed to exceed expectations. With its versatile feature set and high-performance capabilities, this Silicon Storage Technology creation is the ultimate choice for those seeking excellence in embedded system design. Experience the future of technology at your fingertips with the SST89E516RD2-40-I-NJE

Key Features

8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
– Fully Software Compatible
– Development Toolset Compatible
– Pin-For-Pin Package Compatible
SST89E516RD2 Operation
– 0 to 40 MHz at 5V
SST89V516RD2 Operation
– 0 to 33 MHz at 3V
1 KByte Internal RAM
Dual Block SuperFlash EEPROM
– 64 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)
– Individual Block Security Lock with SoftLock
– Concurrent Operation during
In-Application Programming (IAP)
– Memory Overlay for Interrupt Support during IAP
Support External Address Range up to 64 KByte of Program and Data Memory
Three High-Current Drive Ports (16 mA each)
Three 16-bit Timers/Counters
Full-Duplex, Enhanced UART
– Framing Error Detection
– Automatic Address Recognition
Ten Interrupt Sources at 4 Priority Levels
– Four External Interrupt Inputs
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA)
Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
Second DPTR register
Low EMI Mode (Inhibit ALE)
SPI Serial Interface
Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
TTL- and CMOS-Compatible Logic Levels
Brown-out Detection
Low Power Modes
– Power-down Mode with External Interrupt Wake-up
– Idle Mode
Temperature Ranges:
– Commercial (0°C to +70°C)
– Industrial (-40°C to +85°C)
Packages Available
– 40-contact WQFN (Port 4 feature not available)
– 44-lead PLCC
– 40-pin PDIP (Port 4 feature not available)
– 44-lead TQFP
All non-Pb (lead-free) devices are RoHS compliant

Specifications

Source Content uid	SST89E516RD2-40-I-NJE	Pbfree Code	Yes
Part Life Cycle Code	Obsolete	Pin Count	44
Reach Compliance Code	compliant	ECCN Code	3A991.A.2
HTS Code	8542.31.00.01	Has ADC	NO
Address Bus Width	16	Bit Size	8
CPU Family	8051	Clock Frequency-Max	40 MHz
DAC Channels	NO	DMA Channels	NO
External Data Bus Width	8	JESD-30 Code	S-PQCC-J44
JESD-609 Code	e3	Length	16.5354 mm
Moisture Sensitivity Level	1	Number of I/O Lines	36
Number of Terminals	44	On Chip Program ROM Width	8
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Qualification Status	Not Qualified
RAM (bytes)	1024	ROM (words)	67584
ROM Programmability	FLASH	Seated Height-Max	4.572 mm
Speed	40 MHz	Supply Current-Max	88 mA
Supply Voltage-Max	5.5 V	Supply Voltage-Min	4.5 V
Supply Voltage-Nom	5 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Finish	MATTE TIN	Terminal Form	J BEND
Terminal Pitch	1.27 mm	Terminal Position	QUAD
Width	16.5354 mm	uPs/uCs/Peripheral ICs Type	MICROCONTROLLER