Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Purchase today and receive fast shipping process
19-SIPManufacturer:
Mfr.Part #:
STK672-610
Datasheet:
Motor Type - Stepper:
Unipolar
Function:
Driver - Fully Integrated, Control and Power Stage
Output Configuration:
Half Bridge (2)
Interface:
Parallel
EDA/CAD Models:
All bill of materials (BOM) can be sent via email to
[email protected],
or fill below form to Quote for STK672-610, guaranteed quotes back within
12hr.
Please fill in the short form below and we will provide you the quotation immediately.
Additionally, the STK672-610 offers flexibility in motor control strategies with support for both full-step and half-step driving modes. This allows for precise and customizable control of the stepping motor, catering to the specific requirements of different applications or industries. The pulse input control method further adds to the versatility of this IC, offering a comprehensive solution for motor control needs
The motor speed can be controlled by the frequency of an external clock signal.
2-phase excitation or 1-2 phase excitation is selected according to switching the state of the MODE1 pin (low or high).
The excitation mode is set at the rising edge of the clock signal when the MODE2 pin is High, or at the rising edge or falling edge when the MODE2 pin is Low.
The phase is maintained even if the excitation mode is switched in the middle of operation.
The direction of rotation can be changed by applying a High or Low signal to the CWB pin used to select the direction of rotation.
Supports schmitt input for 2.5V high level input.
Incorporating a current detection resistor (0.089: resistor tolerance 2%), motor current can be set using two external resistors.
Equipped with an ENABLE pin that, during clock input, allows motor output to be cut-off and resumed later while maintaining the same excitation timing.
Office photocopiers, printers, etc.
Motor Type - Stepper | Unipolar | Motor Type - AC, DC | - |
Function | Driver - Fully Integrated, Control and Power Stage | Output Configuration | Half Bridge (2) |
Interface | Parallel | Technology | Power MOSFET |
Step Resolution | 1, 1/2 | Applications | General Purpose |
Current - Output | 3.3A | Voltage - Supply | 4.75V ~ 5.25V |
Voltage - Load | 10V ~ 42V | Operating Temperature | 0°C ~ 105°C (TC) |
Mounting Type | Through Hole |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.